Yamaha 5TE-F8197-10 Ring gear shim thickness = c + d e + f, Bearing thickness f 11.00 mm

REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT

Shims are supplied thicknesses.

DRIV

in the following

Final drive pinion gear shim

Thickness (mm)

0.15 0.30 0.40

0.45 0.50 0.60

*****************************************************

Ring gear shim selection

1.Select:

●Ring gear shim(s)

*****************************************************

Selection steps:

●To find the ring gear shim thickness “B”, use the following formula.

Ring gear shim thickness:

“B” = c + d – (e + f)

c = a numeral (usually a decimal number) on the final gear case either added to or subtracted from 45

d = a numeral (usually a decimal number) on the outside of the ring gear bearing housing and added to 1

e = a numeral (usually a decimal number) on the inside of the ring gear either added to or subtracted from 35.00

f = bearing thickness (considered constant)

Bearing thickness f: 11.00 mm

Example:

1)If “53” is stamped on the final gear case, c = 45 + 0.53 = 45.53

2)If “05” is stamped on the ring gear bearing housing,

d = 1 + 0.05

=1.05

3)If “– 05” is stamped on the ring gear, e = 35 – 0.05

=34.95

4)f = 11.00.

7 - 21