Yamaha LIT-11616-16-02, 5TE-F8197-10 Use a rotor holding tool 2 to hold the starter pulley

RECOIL STARTER AND A.C. MAGNETO

ENG

2.Install:

●Woodruff key

●Rotor

NOTE:

●Before installing the rotor, clean the outside of the crankshaft and the inside of the rotor.

●After installing the rotor, check that the rotor rotates smoothly. If not, reinstall the key and rotor.

3.Install:

●Dowel pins

●Gasket New

●Crankcase cover (left)

T.

R.

10 Nm (1.0 m • kg, 7.2 ft • lb)

NOTE:

●When installing the crankcase cover (left), use a long rod to hold the rotor in position from the outside. This will make assembly easier. Be careful not to damage the oil seal.

●Tighten the bolts in stages, using a crisscross pattern.

4.Install:

●Starter pulley 1

T.

R.

50 Nm (5.0 m • kg, 36 ft • lb)

NOTE:

Use a rotor holding tool 2 to hold the starter pulley.

Rotor holding tool:

P/N. YU-01235, 90890-01235

NOTE:

Before installing the starter pulley, do not forget to install the O-ring.

4 - 41