Yamaha LIT-11616-16-02, 5TE-F8197-10 Removing the A.C. Magneto, Flywheel puller YM-01404

RECOIL STARTER AND A.C. MAGNETO

ENG

REMOVING THE A.C. MAGNETO

1.Remove:

●Starter pulley 1

NOTE:

Use the rotor holding tool 2 to hold the starter pulley.

Rotor holding tool:

P/N. YU-01235, 90890-01235

2.Remove:

●Crankcase cover (left)

●Gasket

●Dowel pins

NOTE:

Working in a crisscross pattern, loosen each bolt 1/4 of a turn. Remove them after all of them are loosened.

3.Remove:

●Rotor 1

NOTE:

Use the flywheel puller 2.

Flywheel puller:

P/N. YM-01404, 90890-01404

DISASSEMBLING THE RECOIL STARTER

1.Remove:

●Cap 1

●Starter handle 2

NOTE:

Before untying the knot 3 above the starter handle, make a knot 4 in the rope so that the rope is not pulled into the case.

CHECKING THE A.C. MAGNETO

1.Check:

●Stator assembly

●Pickup coil

Damage → Replace.

4 - 37