Yamaha 5TE-F8197-10, LIT-11616-16-02 Adjustment steps, Tappet adjusting tool YM-08035

ADJUSTING THE VALVE CLEARANCE

CHK ADJ

8.Adjust:

●Valve clearance

*****************************************************

Adjustment steps:

●Loosen the locknut 1.

●Insert a feeler gauge 2 between the adjuster end and the valve end.

●Turn the adjuster 3 clockwise or counterclockwise with the valve adjusting tool 4 until the proper clearance is obtained.

Tappet adjusting tool:

P/N. YM-08035, 90890-01311

●Hold the adjuster to prevent it from moving, and then tighten the locknut.

T .

R .

Locknut:

20 Nm (2.0 m • kg, 14 ft • lb)

●Measure the valve clearance.

●If the clearance is incorrect, repeat the above steps until the proper clearance is obtained.

*****************************************************

9.Install:

●All removed parts

NOTE:

Install all removed parts in the reverse order of their disassembly. Note the following points.

10.Install:

●Recoil starter

● Spark plug

●Tappet covers

LT

T.R.	10	Nm (1.0 m • kg, 7.2 ft • lb)
T.R.		Nm (1.8 m • kg, 13 ft • lb)
	18
T.R.		Nm (1.0 m • kg, 7.2 ft • lb)
	10

NOTE:

Install the tappet covers with the ridge facing up È.

3 - 12