CHECKING THE BULBS AND BULB SOCKETS

ELEC

+

CHECKING THE CONDITION OF THE BULB SOCKETS

The following procedure applies to all of the bulb sockets.

1.Check:

Bulb socket (for continuity)

(with the pocket tester) No continuity Replace.

Pocket tester:

P/N. YU-03112-C, 90890-03112

NOTE:

Check each bulb socket for continuity in the same manner as described in the bulb section; however, note the following.

*****************************************************

a.Install a good bulb into the bulb socket. b.Connect the pocket tester probes to the

respective leads of the bulb socket. c.Check the bulb socket for continuity. If any of

the readings indicate no continuity, replace the bulb socket.

*****************************************************

9 - 8

Page 315
Image 315
Yamaha 5TE-F8197-10, LIT-11616-16-02 service manual Checking the Condition of the Bulb Sockets