Beyond the Basics
stops on each active frequency for five seconds then automatically resumes searching.
•You can copy and save a frequency into a specified bank, channel, or priority channel when the scanner finds an active frequency. See “Frequency Copy” on Page 29 to save the frequency. Frequency copy works only in search banks 1 - 6.
•In the Air and Limit search bands, press FUNC then e to start searching up from the lowest frequency or d to start searching down from the highest frequency.
•You can press e or d at any time to change the search direction or resume searching while stopped on an active frequency.
•Use e or d while paused to increment the frequency one step at a time.
manually tuning to a frequency
You can manually set the scanner to move through all receivable frequencies, or select a specific frequency as a starting point.
1. Press TUNE. TUNE, the current frequency, and ** PAUSED ** appear on the display.
2. Use the number keys to enter the frequency where you want the scanner to start.
3. Press ENT to store the frequency. Press e or d to step up or down from the displayed frequency, or press PAUSE to begin automatic tuning.
4. Press e or d to change the automatic tuning direction. The scanner stops when it finds an active frequency.
Note
If you press PAUSE while tuning, the scanner stops tuning
and **PAUSED** appears on the display. Press PAUSE again, 
and the scanner resumes tuning.
28
