Beyond the Basics

frequency copy

You can copy a frequency into a specified channel, a vacant channel in a specified bank, or a priority channel. This feature lets you easily store frequencies of interest you encounter while searching or tuning. You cannot copy a frequency from the Marine search bands.

copying a frequency into a specified channel

You can copy a frequency into a channel you specify when the scanner stops on that frequency during search mode or when you manually tune it. If a CTCSS or DCS code

is detected on the transmission, the scanner copies the detected code into the channel memory as well.

If you try to copy a frequency that is already stored, the scanner sounds a tone after you press ENT. Dupl.f Chxxx appears at the bottom line. To copy the duplicate frequency anyway, press ENT. Otherwise, press CLEAR to cancel.

1.Press FUNC, PROG when you find a frequency. Chan Store? appears on the bottom line. After about one second, the frequency to be copied flashes on the indicator.

2.Press the desired bank number and channel number where you want to store the frequency. The bank and channel number, then the frequency appear. You can repeat this step as needed until you find an acceptable destination channel. After about one second, the frequency to be copied flashes.

3.Press ENT. All the conditions, such as receive mode and delay condition, are copied onto the channel. Chan Store! briefly appears. The scanner automatically returns to search mode.

29

Page 29
Image 29
Radio Shack PRO-2096 manual Frequency copy, Copying a frequency into a specified channel