Beyond the Basics
3.Connect the two radios together using a male 1/8” phone plug to male 1/8” phone plug cloning cable. The local radio will handshake with the remote radio to prepare for the cloning session. During V-Scanner selective cloning operations, the local radio controls the session for both sending and receiving folders to and from the remote radio.
4.In addition to the two options indicated on the display, you can browse the V-Scanner contents on both radios simultaneously by pressing SRCH on the source radio.
Press CLEAR to exit.
5.To send a V-Scanner folder from the local radio to the remote radio, press e. Use 0-9and . to select the source V-Scanner folder. The name of the source folder appears on the display. You can browse the V-Scanner contents by pressing 0-9and . in succession until the desired folder is located. Press e or d to move between the source and destination folder fields. Use 0-9and . to select the destination V-Scanner folder where you wish to store the sent data. Again, you may browse the V-Scanner contents on the remote scanner by pressing 0-9and . until the desired folder is located. Once you have selected the desired source and destination folders, press ENT to send. You may abort the send operation by pressing CLEAR.
6.To receive a V-Scanner folder from the remote radio into the local radio, press the d key. Use 0-9and . to select the destination V-Scanner folder where you wish to store the received data. The name of the destination folder appears on the display. You can browse the local V-Scanner contents by pressing 0-9and . in succession until the desired folder is located. Press e or d to move between the destination and source folder fields. Use 0-9and . to select the source V-Scanner folder where you wish to store the sent data. Again, you may browse the V-Scanner contents on the remote scanner by pressing
