The Basics
step 1: install your scanner
You can mount your digital trunking scanner in your vehicle, install it for mobility, or install it as a base station.
mounting your scanner in your dashboard
Note
Note
If you are unsure about how to install your scanner in your vehicle, consult your automobile manufacturer, dealer, or a qualified installer. Before installing, confirm your scanner fits in the desired mounting area and you have all the necessary materials. Your scanner requires a 2 x 71/8 x 5 5/16 inch
(50 x 180 x 135 mm) mounting area.
1.Remove the four rear screws and pull off the black case before installing your scanner.
2.Install the DIN sleeve into the opening in your dashboard, lip facing out.
3.Push out the top and bottom tabs to hold the sleeve firmly in place.
4. Slide the scanner into the | |
sleeve until it locks in place. |
|
To remove your scanner from |
|
the DIN sleeve, insert the two |
|
keys straight into the scanner’s |
|
front panel. Then, remove the |
|
scanner by pulling front panel. |
|
When mounting in your dashboard, you will need to
connect an external antenna and an external speaker.
mobile mounting in your vehicle
You can mount your scanner under the dashboard, or on top of it, using the mounting bracket.
11
