Manuals / Radio Shack / Computer Equipment / Scanner

Radio Shack PRO-2096 manual Clear

Models: PRO-2096

1 84

Download 84 pages 29.07 Kb

Page 66

Beyond the Basics

Use the following keystrokes to navigate through the ID lists:

•Press PROG, TRUNK to enter the ID list for the current channel storage bank.

•Press and release e or d to scroll through one at a time.

•Press and hold e or d to rapidly scroll through ID memories.

•Press TRUNK to advance to the next ID sub-bank.

•Press FUNC e or d to advance to the next or previous ID list. 6. If you want to tag the ID, press TEXT.

7. Enter the desired text tag for the ID.

8. Press ENT. (See “Text Input Chart”).

9.To store the next ID memory in sequence, press e and repeat Step 5.

10.Press SCAN to start scanning.

When automatically storing trunked IDs in the ID list by pressing TRUNK during a trunked transmission, the scanner automatically stores the active ID in the next available open ID storage location in the ID list. We suggest leaving ID sub- bank 0 empty when ﬁrst setting up an ID list. This provides a location for new auto-store IDs to be placed and organized.

	Notes	You can enter either decimal or AFS code for ED (EDACS)
	Notes	ID. The default setting is decimal ID entry. To toggle
		ID. The default setting is decimal ID entry. To toggle
		between AFS or decimal EDACS ID display, press FUNC,
		2. AFS format appears on the display for about two
		seconds. Now you can enter EDACS ID codes in AFS
		format.
		If you entered an ID code that is already stored in another
		ID channel, Dupl ID appears. If you want to store the ID
		code anyway, press ENT. To cancel the operation, press
		CLEAR.
		When you try to store more than 150 talkgroup IDs in a
		bank, Memory full! appears on the display.

66

Image 66

Radio Shack PRO-2096 manual Clear

Contents

PRO-2096 Digital Trunking Mobile/Base Scanner Contents Contents Frequency copy Listening to the weather bandVirtual scanner Basics Trunking operation Programming trunked systemsText tags Care Truobleshooting Resetting/initializing your scannerGlossary Warranty Speciﬁcations FCC wants you to knowYour scanner’s keypad See p Your scanner’s rear view Your scanner’s display Install your scanner Mounting your scanner in your dashboardMobile mounting in your vehicle Using your scanner as a base station Use them when you Mount the bracket with ScrewsPower your scanner From a wall outletThrough your vehicle’s ignition From your vehicle’s cigarrette lighter With the metal frame of your vehicleConnect your scanner Connect the supplied antennaConnect an external antenna Connect an external speaker or headphones Listening safelySet up your scanner SquelchStoring conventional frequencies Deleting frequencies from channels Brieﬂy appearsBasics Searching and tuning Basic scanning About channel-storage banksMonitoring a single channel Using Ctcss and DCS Beyond the BasicsSearching a preprogrammed frequency range Search bank charts Receive mode FM/Digital Search bank SR1 CB band Receive mode AM Beyond the Basics Search bank SR4 Aircraft Receive mode AM Using Zeromatic Using seek searchBeyond the Basics Searching for active frequencies Manually tuning to a frequency Frequency copy Copying a frequency into a speciﬁed channelCopying a frequency to the priority channel Same standby mode Listening to the weather bandTesting weather alert Using delay Locking out channels/frequenciesLocking out channels Locking out frequencies Reviewing locked-out search frequenciesChanging the receive mode Clearing locked-out search frequenciesClearing locked-out frequencies in search banks Using attenuator FM/DIGITALGlobal attenuator Turning the key tone on or offUsing the dimmer Changing the display contrastVirtual scanner Using V-scanner Save to V-Scanner ENT= Confirm My V-Scanner Loading from Scanner Please Wait While the folder is being cleared, the scanner will display Scanner Operation Complete Press Enter Using digital AGC Cloning programmed dataCloning v-scanner data Turn on both scannersFull cloning Selective cloningBeyond the Basics Beyond the Basics Talkgroup ID hold Setting squelch for trunk scanningTrunking operation Turning an ID sub-bank on or offOpen and closed mode operation Toggling open and closed modes Manual ID lockout toggleReviewing locked-out talkgroup IDs Trunked delay functionBeyond the Basics Activate ID lockout while scanning Changing from ID text tag display to ID code displayClearing talkgroups IDs Beyond the Basics Clearing all talkgroup IDs in one bank Programming trunked systems Motorola analog, digital, APCO-25 systemsEdacs systems Motorola VHF and UHF systems Motorola 800MHz splinter systems ﬂeet mapsBlock Size Code S10 S11 S12 Beyond the Basics Programming priority channels Programming the priority channel directlyProgramming a weather channel as the priority channel Turning priority on or offBeyond the Basics Programming CTCSS/DCS channels DCS Code Table Storing talkgroup IDs Clear Text tags Assigning a text tag to a channelAssigning a text tag to a group ID Assigning a text tag to a channel-storage bankBeyond the Basics Text input chart Using channel receive modesUpdating the DSP ﬁrmware Troubleshooting Click on Software Updates and DownloadsResetting your scanner Scanner will not scan when Scan is pressedInitializing your scanner InitializingService and repair CareReplacing the fuse Speciﬁcations Frequency CoverageIf Rejection Intermediate Frequencies if FCC wants you to know Scanning legallyGlossary Beyond the Basics Beyond the Basics Beyond the Basics Beyond the Basics Beyond the Basics RadioShack Corporation