Panasonic DVD-LX97 Enjoying in a car, Attaching the unit to the bracket, Release button

3Attaching the unit to the bracket.

While holding the unit with both hands, line up the unit just below the protruding sections on the bracket. Press the unit down about 4 to 5 mm (5/32Sto 3/16S) so that the protrusions on the bracket fit into the holes on the bottom of the unit.

pPlease check the following points before use. –The bracket is securely fastened to the unit.

–The unit is not loose and cannot be lifted upwards.

Line up the protruding

When correctly

sections here.attached,click! you will hear a

locking sound.

Diagram of attached bracket	Use the monitor in the open
	position as shown in the
	illustration to the right to
	prevent abnormal audio or
	damage resulting from
	vibrations in the car.
	The angle of the monitor can
	be adjusted up to about 30°.

pThe angle of the monitor may shift while driving due to vibration, etc.

Enjoying in a car

pDepending on the type of headrest, you

may not be able to attach the bracket.

23 cm (9 1/16S) or less

Releasing the unit from the bracket

Release button

Press the release buttons (left and right) in towards the center of the bracket.

Lift the unit up to release it.

pDo not press the release buttons any time other than when detaching the unit from the bracket.

RQT8237

29

29