Nikon COOLPIXP300BK user manual 173, Night portrait

Error Messages

Display	Description	Solution	A
	The flash is lowered
N	when the scene mode	Slide the K (flash pop-up) control	33, 45,
Raise the flash.	is o (Backlighting)	to raise the flash.	49
	and HDR is Off or
	Night portrait.
	The flash is not raised	Slide the K (flash pop-up) control
N		to raise the flash. The camera can still
	during the Scene auto		33, 42
The flash is lowered.		shoot normally with the flash lowered
	selector mode.	if you do not wish to use it.
		Turn camera off and then on again. If
Lens error	Lens is not operating	error persists, contact retailer or	19
Q	properly.	Nikon-authorized service
		representative.
P	Error occurred during	Turn off camera and reconnect USB
	communication with		136
Communications error		cable.
	printer.
		Turn off camera , remove and reinsert
System error	Error has occurred in	battery, and turn on camera. If the	19
	camera’s internal	error persists, contact retailer or
Q
	circuitry.	Nikon-authorized service
		representative.
PR		Check printer. After solving the
Printer error: check	Printer error	problem, select Resume and press	-	Technical
PR	Specified size of paper	Resume and press the k button to	-
printer status.		the k button to resume printing.*
		Load the specified paper, select
Printer error: check paper	is not loaded.	resume printing.*		Notes
PR	Paper has jammed in	Remove the jammed paper, select
		Resume and press the k button to	-	and
Printer error: paper jam	the printer.
		resume printing.*		Index
PR	No paper is loaded in	Load the specified paper, select
		Resume and press the k button to	-
Printer error: out of paper	the printer.
		resume printing.*

173