Nikon COOLPIXP300BK user manual Error Messages, 170, Display Description Solution

Error Messages

The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them.

	Display	Description		Solution	A
	O	Clock not set.	Set date and time.		144
	(blinks)
	N	Battery exhausted.	Charge or replace the battery.		14, 16
	Battery exhausted.
			Turn off camera, and allow battery to
			cool down before resuming use. Five
			seconds after this message appears,
	P	Battery temperature is	the monitor is turned off, and the
			power-on lamp flickers. After the		19
	Battery temperature high	high.	lamp blinks for three minutes, the
			camera turns off automatically, but
			you can also press the power switch
			to turn it off manually.
	P	Inside of the camera	Leave the camera off until the inside
		has become hot. The
	The camera will turn off		of the camera has cooled and then		–
		camera turns off
	to prevent overheating.		turn it on again.
		automatically.
	Q(blinks red)	Camera cannot focus.	•	Refocus.	28, 29
			•	Use focus lock.	29
Technical	P	Camera cannot	Wait until message clears from display
	Please wait for the	perform other
			automatically when recording is		–
	camera to finish	operations until
			complete.
	recording.	recording is complete.
Notes
	N	Write-protect switch is	Slide the write-protect switch to
	Memory card is write				23
and	protected.	in “lock” position.	“write” position.
Index
	P		• Use an approved card.		167
	This card cannot be used.	Error accessing	• Check that connectors are clean.		23
	P	memory card.	• Confirm that memory card is		22
	This card cannot be read.			correctly inserted.

170