II
DRYER CARE
Cleanthe lintfilter
[] After each load.
[] To shorten drying time.
[] To operate more energy efficiently.
NOTE: Do not operate your Dryer without the lint filter in place.
Load the dryer properly
[] Place only one washload in your Dryer at a time.
[] Mixed loads of heavy and lightweight fabrics will dry differently, which may result in lightweight fabrics being dry while heavy fabrics remain damp at the end of a drying cycle.
[] Add one or more similar items to your Dryer when only one or two articles of clothing need drying. This improves the tumbling action and drying efficiency.
[] Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some fabrics.
Getting started
1.Load your Dryer loosely- DO NOT overload.
2.Close the door.
3.Select the appropriate cycle and options for the load.
4.Press the Start/Pause button.
5.The Dryer indicator light will illuminate.
6.The estimated cycle time will appear in the display. The time may fluctuate to better indicate drying time remaining in the cycle.
NOTES:
[] When the cycle is completed, the Door Lock light will go out and "End" will appear in the display.
[] Pressing Power cancels the cycle and stops your Dryer.
[] The Drying, Cooling, and Wrinkle Prevent indicator lights will illuminate during those portions of the cycle.
WARNING: | Do not place anything on top of your dryer while it |
is running. |
|
Contzol panel
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners directly on the panel.
The control panel finish may be damaged by some laundry pre- treatment soil and stain remover products.
Apply such products away from your Dryer and wipe up any spills or overspray immediately.
Tumbler
Remove any stains such as crayon, ink, or fabric dye (from new items such as towels or jeans) with an all purpose cleaner.
Tumble old towels or rags to remove any excess stain or cleaning substance.
Once these steps are followed, stains may still be visible, but should not transfer to subsequent loads.
Stainless steel tumbler
To clean the stainless steel tumbler, use a damp cloth with a mild,
Remove the cleaner residue and dry with a clean cloth.
Dryer exterior
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Dryer exhaust system
Should be inspected and cleaned yearly to maintain optimum performance.
The outside exhaust hood should be cleaned more frequently to ensure proper operation.
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from dryer.
Place dryer at least 18 inches {46 cm) above the floor for
a garage installation.
Failure to do so can result in death, explosion, or fire.
19
19 | i,_ft | 9:49:26 | I | |||
|
|
|