II
Electrical Shock Hazard
Plug into a grounded 4 prong outlet.
Failure to do so can result in death or electrical shock.
it is your responsibility
[] To contact a qualified electrical installer.
[] To be sure that the electrical connection is adequate and in conformance with the Canadian Electrical Code, 022.1 - latest edition and all local codes. A copy of the above codes standard may be obtained from: Canadian Standards
Association, 178 Rexdale Blvd., Toronto, ON M9W 1 R3 Canada.
[] To supply the required 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply on a separate
fused on both sides of the line. A
circuit.
[] This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard
©
4-wire receptacle 14-30R
[] Do not use an extension cord.
If you are using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement
Part Number
GROUNDING INSTRUCTIONS
[] For a grounded,
This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING= = Improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
[] For Gas Models
Your Dryer has a cord with an
The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
Do not modify the plug provided with your Dryer - if it doesn't fit the outlet, have a proper outlet installed by a qualified electrician.
NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR HOT WATER PIPES.
SAVE THESE INSTRUCTIONS
8 | i,_ft | 9:49:13 | I | |||
|
|
|