Electrolux 56800 manual Setting time delay, Starting the programme

AUDIBLE SIGNAL

When the drying cycle has finished, an intermittent audible signal will sound.

SPECIAL CARE

For especially gentle drying of sensitive fabrics with the l care label and for temperature-sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat.

SPECIAL CARE is only suitable for use with loads of up to 3kg!

SENSITIVE

For gentle drying of frequently-worn textiles. Programme starts on full heat setting, which is then reduced towards the end of the programme to ensure gentle care of laundry.

3 SPECIAL CARE and SENSITIVE cannot be selected together.

Setting time delay

3 The DELAY TIMER button allows you to delay the start of a programme by 3, 6 or 9 hours.

1.Select the programme

2.Press the DELAY TIMER button as many times as necessary until the re- quired display is illuminated:

–9h display for programme to start in 9 hours.

–6h display for programme to start in 6 hours.

–3h display for programme to start in 3 hours.

3 By pressing the DELAY TIMER button again, the time delay is cancelled. The display goes out.

3.To activate the delay timer, press the START/PAUSE button.

Note: If a time delay of 9 hours is selected, the display 9h is illuminat- ed. After 3 hours, the display will jump round and 6h will be illuminat- ed; after another 3 hours, 3h is illuminated. After a total of 9 hours, the programme will start.

Starting the programme

Press the START/PAUSE button. The programme is started.

The programme progress display show drying progress.

13