Electrolux 56800 manual Safety, Prior to initial start up, Intended use

Page 5

Operating Instructions

1Safety

Prior to initial start up

Note the ”Installation and connection instructions”

Before first starting up, check the machine for any damage incurred during transport. Never connect a damaged machine. If parts are damaged, contact your supplier.

Intended use

The dryer is intended for drying standard laundry in domestic envi- ronments.

Conversions or modifications to the dryer are not permitted.

The laundry must not contain flammable solvents (benzene, alcohol, stain remover, etc.) . Risk of fire and/or explosion! Laundry which has come into contact with such substances must be rinsed thoroughly by hand before drying.

When using dry-cleaning sets: Only use those products which are de- clared as suitable for the dryer by the manufacturer.

Do not place items of laundry in the dryer which contain foam rubber or materials similar to rubber. Risk of fire!

Do not place heavily worn laundry items in the dryer. Risk of fire!

Do not place laundry items with loose fillings (e.g. cushions) in the dryer. Risk of fire!

Parts with rigid components (e.g. door mats) may cover the air slots. Risk of fire! Do not place such items in the dryer.

Do not overfill the dryer. Risk of fire! Observe max. loading volume of 6 kg.

Ensure that explosive objects (e.g. cigarette lighters, spray cans, etc.) do not enter the dryer with the laundry. Risk of fire and/or explo- sion!

Clean the micro-fine filter and fine strainer after each drying cycle.

Do not use the machine if there are no lint filters or if these are dam- aged. Risk of fire!

Clean the heat exchanger regularly.

With stacked washer and dryer: Do not place objects on the dryer. These may fall off during operation.

The lampcover for the interior light must be screwed down tightly.

5

Image 5
Contents Lavatherm Dear Customer Contents Installation and connection instructions Intended use SafetyPrior to initial start up Disposal Child safetyGeneral safety Pre-draining Drying cycle Environmental tipsOperating screen Description of machineSorting and preparing laundry Before the first drying cycleAdditional Programme Application/properties Care SymbolsOverview of programmes Easy Iron Drying Switching machine on / switching light onOpening loading door / loading laundry Selecting the programmeStarting the programme Setting time delayDrying cycle complete / removing laundry Removing laundry or loading laundry when necessaryChanging programme Cleaning lint filter Cleaning and maintenanceClean the entire filter area Cleaning the door sealEmpty water reservoir after every drying cycle Emptying the water reservoirCleaning heat exchanger Clean operating screen and housing Cleaning the drumTroubleshooting by yourself Problem Possible cause RemedyNext time you dry Changing bulb for interior light Objective Implementation Programming optionsConsumption values Technical dataProgramme EnergyRemoving transport safety packaging Installation safety instructionsElectrical connection Permanent Connection Door reversal instructionsOpen door Installation kit for external condensate drain Special accessoriesIntermediate installation kits for stacked washer and dryer European Guarantee Standard guarantee conditionsGreat Britain ExclusionsAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Australia Korea South NamibiaBulgaria Kuwait/Arabian Gulf Syria Cyprus Lebanon IranIsrael Malaysia Saudi Arabia Hong Kong Lithuania RussiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaPage Page For Customer Service in the Republic Service and Spare PartsAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG