Programming options
Objective | Implementation | |
| 1. Turn the programme selector to any programme. | |
Permanently pro- | 2. Press the AUDIBLE SIGNAL button and hold down for ap- | |
gramme in the audible | prox. 5 seconds. | |
signal which reminds | A brief signal sounds several times. The AUDIBLE SIGNAL | |
you that the pro- | display flashes several times. | |
gramme is complete. | The setting is permanently programmed. | |
| The setting is cancelled as described under 1 and 2. | |
| 1. Turn the programme selector to any programme. | |
| 2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the | |
Adjust ’level of dryness’ | same time and hold down for approx. 5 seconds. | |
The current setting is displayed on the programme | ||
detection: | ||
progress display: | ||
If the laundry is slightly | ||
– END display: Setting for drier laundry | ||
drier or slightly damp- | ||
– COOLING display: Standard setting | ||
er at the end of the | ||
– DRYING display: Setting for damper laundry | ||
programme than with | ||
3. Press the START/PAUSE button until the setting required | ||
the standard setting. | ||
appears on the programme progress display. | ||
| ||
| 4. Turn the programme selector to OFF. | |
| The setting is permanently programmed. | |
| 1. Turn the programme selector to any programme. | |
To deactivate the EMP- | 2. Press the DELAY TIMER and SPECIAL CARE buttons at the | |
TY WATER display when | same time and hold down for approx. 5 seconds. The | |
using an external drain | EMPTY WATER display flashes briefly. | |
for the condensed wa- | The EMPTY WATER display is permanently deactivated. | |
ter. | Settings may be cancelled as under 1 and 2, but the EMPTY | |
| WATER display is briefly illuminated (instead of flashing). | |
|
|
22