Cleaning the drum
1
3 Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expect- ed when removed from the dryer.
Use a damp cloth, which has been soaked in water and a little vinegar, to wipe the inside of the drum and drum ribs.
Clean operating screen and housing
1 Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if…?
Troubleshooting by yourself
If, during operation, the dryer shows an error display (one or more dis- plays flashing on the programme progress display), check first of all whether you can remedy the problem yourself by means of the table below. If you cannot solve the problem: Switch the machine off and on again. Reset programme. Press the START/PAUSE button.
If the error display is still shown, please contact your local Service Force Centre and inform about flashing displays.
Problem | Possible cause | Remedy |
| Mains plug is not plugged in | Plug in at mains socket. Check |
| or fuse is not working cor- | fuse in fuse box (domestic in- |
| rectly. | stallation). |
Dryer does not work. | Loading door is open. | Close loading door. |
| ||
| Have you pressed the START/ | Press the START/PAUSE button |
| PAUSE button? | again. |
|
|
|
19