Crosley CDE-8000GBL, CDE-8000GS manual Starting your dryer, Dry Level, Beeper, Start / Pause Button

10 Dry Level

• Use these buttons to set dry level

• First, select sensor dry cycle.

• Select dry level to adjust how much you want to dry the load.

As the cycle runs, the control senses the dryness of the load and adjusts the time automatically based on the selected dryness level.

NOTE: DRY LEVEL selections can only be made while using Sensor Dry Cycles.

Selecting MORE Dry or LESS Dry automatically adjusts the needed time which is already sensed.

11Beeper

•The BEEPER controls the volume of the beep that is made when you

press any of the buttons on the control panel. Press BEEPER to adjust the sound level or turn off the signal.

12Start / Pause Button

•Use this button for start or pause.

Starting your dryer

1Before use

•Clean lint screen before or after each cycle.

•Place laundry into dryer and shut door. See Loading.

•Turn the knob to select the drying cycle you want. The preset setting for Sensor Dry Cycles or Manual Cycles will glow. The estimated or actual cycle time (in minutes) will show in the display.

Following are sample loads for Super Capacity Dryers:

2Loading

•Determine load size by the amount of space the load requires rather than the weight of the load.

•Avoid overloading the dryer.

Following these instructions can help reduce your utility bill, prolong the life of your clothes, and decrease the likelihood of uneven drying and wrinkle.

3To use a sensor dry cycle

•Select DRY LEVEL to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level.

•Select the desired options.

•Press START/PAUSE

NOTE: DRY LEVEL selections can only be made while using Sensor Dry Cycles. Selecting MORE Dry or LESS Dry automatically adjusts the sensed time needed.