Crosley CDE-8000GW, CDE-8000GS manual Part 8 Troubleshooting Guide, Problem My Dryer Won’t Start

Question

What to Do

• Is the dryer plugged in?

Confirm that the dryer’s plug is securely and completely pushed into the

laundry room’s power outlet.

• Is the fuse blown, or is the

Check your home’s or laundry room’s fuse box/circuit breaker box and replace

circuit breaker tripped?

the fuse or reset the circuit breaker.

(IMPORTANT: electric dryers generally use two fuses or breakers.)

Question

What to Do

• Is the fuse blown, or is the

If the fuse is blown or the circuit breaker tripped, the dryer might tumble but not

circuit breaker tripped?

heat. Check your home’s or laundry room’s fuse box/circuit breaker box and

replace the fuse or reset the circuit breaker.

(IMPORTANT: electric dryers generally use two fuses or breakers.)

• Is the gas supply or service

Confirm that the house gas shutoff and the dryer gas shutoff are both fully

blocked or off?

open.

Question

What to Do

• Did you follow the instructions

Confirm and follow the instructions provided with your fabric softener product.

on your fabric softener product?

• Are you drying clean and dirty

Make sure to use your dryer to dry only clean items, because dirty items can

clothes together?

soil clean clothes placed in the same load or later placed in the dryer drum.

• Were your clothes entirely

Stains on dried clothes are actually stains that weren’t cleansed during the

clean?

washing process. Please review and confirm that you are following your

washing instructions and that the clothes are being completely cleaned.

Question

What to Do

H1

Is displayed when humidity sensor is error. In this case, power off and restart.

H2

Is displayed when temperature sensor is error. In this case, power off and

restart.

H5

Heater temperature control problem. In this case, call servic center.