Electrical Connection, Electrical requirements

4Electrical Connection

Make sure that you have an earthed power outlet socket rated at 13 amps (minimum).

Attention!

If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability.

For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

AWarning

This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

In order to avoid hazards, damaged supply cord should be replaced by the manufacturer, its service agent or similarly qualified people.

Built-under installation

This appliance can be installed under a worktop.

AOnly authorised specialists are permitted to carry out a built-under installation. Risk of electric shock!

A Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Washer/dryer combination

Green and yellow

or green

N	L
Blue or black	Brown or red

Do not stack washing machine on top of the tumble dryer. This would damage both appliances and guarantees would become void. It is also unsafe to stack an appliance on top of another without using a suitable and approved stacking kit obtained from the manufacturer of the appliances.

•A special stacking kit is required as an optional extra please contact customer service.

10 - EN

DRVS 62 S, DRVS 62 W specifications

The Beko DRVS 62 W and DRVS 62 S are innovative and efficient integrated vented tumble dryers designed to meet the laundry needs of modern households. These models are crafted with attention to detail, ensuring they deliver powerful drying performance while maintaining energy efficiency, helping you save on utility bills.

One of the standout features of the Beko DRVS 62 series is its advanced sensor drying technology. This sophisticated system uses moisture sensors that detect the moisture levels in your laundry and automatically adjust the drying time accordingly. This means your clothes will never be over-dried, reducing wear and tear, and ensuring they maintain their quality and longevity.

Both the DRVS 62 W and DRVS 62 S come with various drying programs that cater to different fabric types and laundry loads. Options include cotton, synthetics, and delicate cycles, offering flexible drying solutions. The rapid dry program is particularly useful for those in a hurry, efficiently drying small loads in minimal time.

In terms of capacity, these models boast a 6 kg load, making them suitable for smaller households or those with limited space. Despite their compact design, they are thoughtfully engineered to maximize drying efficiency. The energy efficiency rating of these tumble dryers is commendable, with class B ratings that contribute to reduced energy consumption, making them environmentally friendly.

The user-friendly digital display provides clear visibility of the chosen programs and settings. The delayed start function allows users to set the dryer to begin at a convenient time, further enhancing flexibility and convenience. Safety features are also paramount, with a child lock ensuring that little hands can’t accidentally disrupt cycles.

Moreover, the design of the DRVS 62 W and DRVS 62 S ensures that they can be seamlessly integrated into your kitchen or laundry area, providing both functionality and aesthetic appeal. The models are equipped with easy-to-clean fluff filters, ensuring consistent performance and easy maintenance over time.

Overall, the Beko DRVS 62 W and DRVS 62 S stand out as reliable, efficient, and versatile options for tackling everyday laundry challenges. With their modern technologies and thoughtful features, they are a worthy investment for anyone seeking quality and convenience in their home laundry solutions.