Auxiliary function
Cancel Audio Warning
Your machine will send out an audio warning when the programme comes to an end. If you do not want to hear this buzzing, you need to press the “Cancel Audio Warning” button. The relevant LED will light up when this button is pressed and an audio warning will not be given when the programme comes to an end.
CYou can select this function either before or after the programme starts.
Warning indicators
CWarning indicators may differ according to the model of your machine.
Filter cleaning
A warning LED will light up to remind filter cleaning after the programme finishes.
CIf the filter cleaning warning LED
lights up continuously, please refer to, “Solution suggestions for problems”.
Water tank
A warning LED will light up at the end of the programme or when the tank is full with water. The machine stops operating when this warning LED lights up during a programme running. To restart the machine, please drain the water in
the water tank. Press "Start/Pause/ Cancel" button to start the programme after you have emptied the water tank. The warning LED goes off and the programme resumes operating.
Starting the Programme
1.Press “Start/Pause/Cancel” button to start the programme.
2.“Start/Pause/Cancel” button will light up to indicate that the programme has started.
Progress of programme
Progress of a running programme is shown through the programme
At the beginning of every programme step, the relevant indicator LED will light up and light of the completed step will turn off.
“Drying”:
-Drying level will be illuminated during the whole drying process until the drying degree reaches “ Ready to Iron “.
“ Ready to Iron “:
-Starts to illuminate when the drying degree reaches “ Ready to Iron “ step and remains illuminated until the next step.
“ Ready to Wear “:
-Starts to illuminate when the drying degree reaches “ Ready to wear “ step and remains
illuminated until the next step.
“Final / Anti-creasing”:
-Illuminates when the programme comes to an end and
CIf more than one LED light up or flash concurrently, it means there is malfunctioning or a failure (please see, Solution suggestions for problems).
Changing the programme after the programme has started
You can use this feature after your machine has started to dry your clothes under higher or lower temperatures.
For example;
Press and hold the “Start/Pause/Cancel” button for about 3 seconds to “Cancel” the programme in order to select “Extra Dry” programme instead of “Iron Dry” programme.
Select the “Extra Dry” programme by rotating the programe knob.
Press “Start/Pause/Cancel” button to start the programme.
CThe programme which is selected first will go on even if the programme selection button is moved and another programme mode is selected while the machine is operating. You must cancel the ongoing programe in order to change the drying programme. (See, Ending the programme through canceling)
16 - EN