For the condenser (products equipped with a condenser);
Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your machine is condensed and then pumped into the tank.
CClean the condenser after every 20 drying cycles or once a month.
To clean the condenser;
1If a drying process has been carried out, open the door of the machine and wait until it cools down.
2Unlock the 4 condenser locks after opening the kick plate.
3 Pull out the condenser.
4Clean the condenser with pressurized water and wait until the water drains.
5Replace the condenser with the side labeled “Top” facing upwards. Lock the 4 condenser locks. Make sure that the red lock on the upper right corner is engaged securely.
6 Close the kick plate cover.
Close properly and check the locking latchs?
21 - EN