programme is running!
If you forget to drain the water tank, your dryer will stop during the following drying cycles when the water tank is full and the “Water tank” warning light will turn on. If this is the case, press the “Start/Pause/ Cancel” button to resume the drying cycle after draining the water tank.
To drain the water tank:
1.Drain the water as shown on the picturre .
2.If there is lint accumulation in the water tank cover, clean it and press to close.
3. Place the water tank into its seat.
For the condenser
Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank.
CClean the condenser after every 30 drying cycles or once a month.
To clean the condenser:
1.If a drying process has been carried out, open the door of the machine and wait until it cools down.
2.Unlock the 2 condenser locks after opening the kick plate.
3. Pull out the condenser.
4.Clean the condenser by applying pressurized water with a shower head and wait until the water drains.
20
EN