Beko DCU 7230 manual Important safety instructions, General safety

Page 6

2Important safety instructions

This section includes safety information that will help protection from risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void.

General safety

•Never place the machine on a carpet- covered floor, otherwise, lack of airflow beneath the machine may cause electrical parts to overheat. This will cause problems with your machine.

•If the power cable or mains plug is damaged, you must call Authorised Service Agent for repair.

•The product should not be plugged in during installation, maintenance and repair works. Such works should always be made by the technical service. Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons.

•Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table.

•Operate your product at temperatures between +5°C and +35°C.

•Do not use electrical devices in the product.

•Do not connect the air exit of the product to the exit ducts which are used for the exhaust fumes of the devices operating with gas or other types of fuel.

•You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.

•Always clean the lint filter before or after each loading.

•Never operate your dryer without the lint filter installed.

•Do not allow fibre, dust and dirt accumulation around the exhaust exit and at adjacent areas.

•Power cable plug must be within easy reach after installation.

•Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of electric shock.

•Do not make any changes on the plug

6

supplied with the product. If it is not compatible with the socket, have a qualified electrician change the socket with a suitable one.

•Items cleaned or washed with gasoil/ fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor.

•Do not dry items cleaned with industrial chemicals in the dryer.

•Do not dry unwashed items in the dryer.

•Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

•Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.

•Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the fabric softener or the product.

•This product must be earthed.

Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure. Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product. This plug must be installed appropriately and inserted into a socket which is grounded in accordance with the local laws and regulations.

•Do not install the product behind a door with a lock, sliding door or a door that has a hinge against the hinge of the dryer.

•Do not install or leave this product in places where it will be exposed to outdoor conditions.

•Do not tamper with the controls.

•Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the

EN

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DCU Explanation of symbols Read this manual prior to initial operation of the productTable of Contents Overview Kick plate opening tab Fluff filter Adjustable feetYour Dryer Control panelTechnical Specifications Important safety instructions General safetyDo not use electrical devices in the product Children’s safety Intended useInstallation Disposing of packaging material Adjusting the feetFirst use Transportation of the machineThis appliance must be earthed Electrical ConnectionElectrical requirements Fitting a different plugLaundry suitable for drying in the machine Initial preparations for dryingThings to be done for energy saving Laundry unsuitable for drying in the machineFollowing weights are given as examples Preparing laundry for dryingCorrect load capacity Selecting a Programme and OperatingYour Machine Control panelPreparing the machine 1. Plug in your machine Programme selectionProgramme selection and consumption table Cottons / ColoredsStarting the programme Time delayAuxiliary function Progress of programmeAdding/removing laundry in standby mode Finishing by cancelling the programmePress Start/Pause/Cancel button to start the programme Child-proof lockEnd of programme 18 ENSensor Maintenance and cleaningFilter Cartridge / Door Inner Surface Water tankFor the condenser Programme is runningPlace the water tank into its seat Page Suggested solutions for problems What is not covered? GuaranteeWhat is covered? Important notesRepublic of Ireland ServiceService once the manufacturers guarantee has expired UK Mainland & Northern IrelandPage Page

DCU 7230 specifications

The Beko DCU 7230 is a powerful and efficient condenser tumble dryer designed to meet the needs of modern households. Emphasizing performance and convenience, this appliance provides a reliable solution for drying clothes quickly and effectively.

One of the standout features of the Beko DCU 7230 is its large drum capacity of 7 kilograms, which is suitable for medium-sized families. This allows users to dry sizable loads of laundry in one go, saving both time and energy. The drum is made from durable materials that help protect delicate fabrics while ensuring even drying.

The dryer boasts a range of drying programs, enabling users to choose the best setting for each type of fabric. Options include cotton, synthetics, and delicate cycles, ensuring that garments are treated according to their specific requirements. Additionally, the DCU 7230 features a timed drying option, which allows users to set cycles according to their schedules.

One of the key technologies integrated into the Beko DCU 7230 is its sensor drying system. This innovative feature automatically detects the moisture level in the drum and adjusts the drying time accordingly. This not only prevents over-drying, which can lead to fabric damage but also enhances energy efficiency, saving users money on utility bills.

The machine is also equipped with a reverse action drum, which helps to reduce tangling and creasing of clothes. This feature allows for more thorough drying and makes ironing easier, providing added convenience in your laundry routine.

Furthermore, the Beko DCU 7230 is designed with user-friendliness in mind. Its clear LCD display provides easy navigation through settings, and the filter is accessible for quick cleaning, ensuring optimal performance.

Energy efficiency is another highlight of the DCU 7230, which is rated class B. This certification indicates a balance between performance and sustainability, making it an excellent choice for environmentally conscious consumers.

In summary, the Beko DCU 7230 condenser tumble dryer combines practicality, advanced technology, and energy efficiency. With features designed to accommodate various fabric types and an automatic drying system, it is an excellent appliance for those seeking a reliable and efficient drying solution.
Top Page Image Contents