Beko DCU 7230 manual Installation

Page 8

3Installation

A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products will cause risks for your safety.

Appropriate installation location

• Install the product in an environment which has no risk of freezing and is in a stable and level position.

• Operate your product in a well ventilated, dust-free environment.

• Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden plinths.

• Do not place your product on a long pile rug or on similar surfaces.

• Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.

• Once the product is installed, it should stay at the same place where its connections have been made. When installing the product, make sure that the rear wall of it does not touch anywhere (tap, socket, etc.) and also pay attention to install the product at a place where it will stay permanently.

B Do not place the product on top of the power cable.

•Keep at least 1.5 cm distance to walls of other furniture.

Removing the transportation safety assembly

ARemove the transportation safety assembly before using the product for the first time.

1.Open the loading door.

2.There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX.

3.Pull the nylon towards yourself and remove the transportation safety assembly.

AMake sure that you have removed the transportation safety assembly (nylon+styrofoam pieces) before using the product for the first time. Do not leave any items inside the drum.

Under counter installation

•A special part (Part no. 297 360 0100) replacing the top trim can be provided and installed by the Authorised Service Agent in order fit the machine under a low counter or in a cupboard. It should never be operated without the top trim.

•Leave at least 3 cm of space between the side and rear walls of the product and the walls of the counter/cupboard when installing your product under a counter or in a cupboard.

Mounting over a washing machine

•A fitting device should be used between the two machines when installing above a washing machine. The bracket must be installed by the Authorised Service Agent.

•Place the product on a firm floor. If it will be placed on top of a washing machine, the approximate weight of both machines may reach 180 kg when they are full. Therefore, the floor must be capable of carrying the load on it!

Connection to water drain;

In products equipped with a condenser unit the water accumulated during the drying cycle is collected in the water tank. You should drain the accumulated water after each drying cycle.

You can directly send the accumulated water out through the water drain hose supplied

8

EN

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DCU Explanation of symbols Read this manual prior to initial operation of the productTable of Contents Kick plate opening tab Fluff filter Adjustable feet Your DryerOverview Control panelTechnical Specifications Do not use electrical devices in the product Important safety instructionsGeneral safety Children’s safety Intended useInstallation Adjusting the feet First useDisposing of packaging material Transportation of the machineElectrical Connection Electrical requirementsThis appliance must be earthed Fitting a different plugInitial preparations for drying Things to be done for energy savingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineCorrect load capacity Following weights are given as examplesPreparing laundry for drying Selecting a Programme and OperatingYour Machine Control panelPreparing the machine 1. Plug in your machine Programme selectionProgramme selection and consumption table Cottons / ColoredsTime delay Auxiliary functionStarting the programme Progress of programmeFinishing by cancelling the programme Press Start/Pause/Cancel button to start the programmeAdding/removing laundry in standby mode Child-proof lockEnd of programme 18 ENMaintenance and cleaning Filter Cartridge / Door Inner SurfaceSensor Water tankPlace the water tank into its seat For the condenserProgramme is running Page Suggested solutions for problems Guarantee What is covered?What is not covered? Important notesService Service once the manufacturers guarantee has expiredRepublic of Ireland UK Mainland & Northern IrelandPage Page

DCU 7230 specifications

The Beko DCU 7230 is a powerful and efficient condenser tumble dryer designed to meet the needs of modern households. Emphasizing performance and convenience, this appliance provides a reliable solution for drying clothes quickly and effectively.

One of the standout features of the Beko DCU 7230 is its large drum capacity of 7 kilograms, which is suitable for medium-sized families. This allows users to dry sizable loads of laundry in one go, saving both time and energy. The drum is made from durable materials that help protect delicate fabrics while ensuring even drying.

The dryer boasts a range of drying programs, enabling users to choose the best setting for each type of fabric. Options include cotton, synthetics, and delicate cycles, ensuring that garments are treated according to their specific requirements. Additionally, the DCU 7230 features a timed drying option, which allows users to set cycles according to their schedules.

One of the key technologies integrated into the Beko DCU 7230 is its sensor drying system. This innovative feature automatically detects the moisture level in the drum and adjusts the drying time accordingly. This not only prevents over-drying, which can lead to fabric damage but also enhances energy efficiency, saving users money on utility bills.

The machine is also equipped with a reverse action drum, which helps to reduce tangling and creasing of clothes. This feature allows for more thorough drying and makes ironing easier, providing added convenience in your laundry routine.

Furthermore, the Beko DCU 7230 is designed with user-friendliness in mind. Its clear LCD display provides easy navigation through settings, and the filter is accessible for quick cleaning, ensuring optimal performance.

Energy efficiency is another highlight of the DCU 7230, which is rated class B. This certification indicates a balance between performance and sustainability, making it an excellent choice for environmentally conscious consumers.

In summary, the Beko DCU 7230 condenser tumble dryer combines practicality, advanced technology, and energy efficiency. With features designed to accommodate various fabric types and an automatic drying system, it is an excellent appliance for those seeking a reliable and efficient drying solution.
Top Page Image Contents