6User maintenance and cleaning instructions
Lint filter
Lint and fibers released from the laundry in to the air during the drying cycle are collected in the “Lint Filter”.
C Fibres and lint are formed during wearing and washing.
A Always clean the filter after each drying cycle.
Sensor
There are humidity sensors in your machine that detect whether the laundry is dry or not. For sensor cleaning;
1.Open loading door.
2.Allow machine to cool off if drying has been done recently.
3.Wipe the metal sensors with a soft cloth dampened with vinegar and dry the sensors afterwards.
To clean the Filter;
1.Open loading door.
2.Remove the lint filter by pulling it up and open the filter.
3.Clean lint, fiber, and by hand or with a soft piece of cloth.
4.Close the filter and put it back in place.
C You can clean the filter and filter area with a vacuum cleaner.
C Clogging may arise on the filter surface after using your machine for some time; if this occurs, wash the filter with water and dry it before using again.
C Clean the metal sensors at regular intervals (4 times a year).
A Never use solvents, cleaning agents or similar substances when cleaning as these might cause fire and/or an explosion!
22 - EN