Blomberg TKF 8451 SGC 50, TKF 8451 A 50, TKF 8451 AG 50 manual Auxiliary functions

Auxiliary functions

Audio Warning

The machine will give an audio warning when the programme comes to an end. If you do not want the machine give an audio warning, press the Volume Level button repeatedly until “x” appears on the display. Use the same button to adjust the volume level.

C You can activate this function either before or after the programme starts.

	Cancel	Audio warning		Audio warning		Audio warning
audio warning			level 1		level 2		level 3

Dryness level

Used to adjust the required dryness level. More drying is performed compared

to the default settings when “+” sign appears and less drying is performed when “-” sign appears. Programme duration can change depending on the selection.

C You can activate this function only before the programme has started.

Anti-creasing

You can use Anti-creasing function to prevent laundry from creasing if you will not take the laundry out after the program has come to an end. This program rotates the laundry in every 240 second for 2 hours to prevent creasing. Anti-creasing is activated but the programme is still running in the first display image below. Drying cycle is completed and the Anti-creasing step has started in the second display image.

C Press Anti-creasing button to activate this function.

Changing the contrast

Adjust the display contrast in order to make the symbols on the display appear clearer. It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine.

Press and hold the Spin Speed / Timer Programme button for 3 seconds. When the contrast is changed, all symbols on the display will appear for

3 seconds in order to indicate that the process is complete.

C Perform the same procedure to revert back to the previous contrast setting.

Warning symbols

C Warning symbols may differ according to the model of your machine.

Lint filter cleaning

When the programme is completed, a warning symbol will appear to remind that the filter needs to be cleaned.

C If the Filter Cleaning symbol flashes continuously, refer to “Troubleshooting” section.

Water tank

When the programme is completed, a warning symbol will appear to remind that the water tank needs to be drained.

If the water tank becomes full while the programme is running, the warning

19

EN