Starting the programme
Press Start / Pause / Cancel button to start the programme.
Start / Pause symbol will light up to indicate that the programme has started and “:” symbol between the remaining time will continue flashing.
Progress of programme
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drying |
| Wardrobe |
| Anti- | |||
|
|
| (Extra) |
| creasing | ||
| Iron |
| Ventilation |
|
|
Progress of a running programme is indicated on the display by means of a set of symbols.
At the beginning of each programme step, the relevant symbol in the series of symbols will light up and thus, at the end of the programme, all symbols will remain lit up. The rightmost symbol on the display indicates the step being carried out.
Drying
Drying symbol lights up in all programmes apart from ventilation.
Iron Dry
Starts to illuminate when the dryness level reach Iron Dry step.
Cupboard Dry
Starts to illuminate when the dryness level reach Wardrobe Dry step.
Extra Dry
Starts to illuminate when the dryness level reach Wardrobe Dry Extra step.
Ventilation
Ventilation symbol illuminates when the programme comes to an end.
C
21
Child-proof Lock
Machine is equipped with a Childproof Lock which prevents interfering with the current programme flow by pressing any button. All buttons except the On
/Off button on the control panel are deactivated when the
In order to activate the Childproof Lock, press Audio Warning and
To start a new programme after the current programme is over or to interrupt the current programme, the
Lock should be deactivated. Press the same buttons for 3 seconds again to
deactivate the
display when the
C
When the
•Display symbols will not change even if the position of Programme Selection knob is changed while the machine is running or in halt.
•If the
the Programme Selection knob while the machine is running, the machine stops and new programme information is displayed.
Changing the programme after it has started
After the machine starts, you can change the selected programme and dry your laundry in a different programme.
1. If you want to select Extra Dry
EN