Beko DC 7100 manual Preparing the machine, Timer programme selection, 14 EN

Page 14

Preparing the machine

1. Plug in your machine.

2. Place the laundry in the machine.

3. Press the “On/Off” button.

CPressing the “On/Off” button does not necessarily mean that the programme has started. Press “Start/Pause/Cancel” button of the machine to start the programme.

Timer programme selection

Decide the appropriate time from the table below which includes drying temperature in degrees. Select the desired time with the timer programme selection button.

 

Dry at high temperature only

 

for cotton laundry. Thick and

Extra dry

multi layered laundry (E.g.:

towels, linens, jeans) are dried

 

 

in a way that they do not

 

require ironing before placing

 

in the wardrobe.

 

Normal laundry (E.g.:

Cupboard

tablecloths, underwear) are

dried in a way that they do not

dry

require ironing before placing

 

 

in the drawers.

 

Normal laundry (E.g., Shirts,

Iron Dry

dresses) are dried ready to be

 

ironed.

CFor further programme details, see,

“Programme Selection Table”

Main programmes

Anti-creasing

A 2-hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme is over. This programme rotates the laundry in 600-second intervals to prevent creasing.

•Ventilation

Only ventilation is performed for 10 minutes without blowing hot air. You can air your clothes that have been kept at closed environments for a long time thanks to this programme to deodorize unpleasant odors.

•Timer programmes

You can select one of the 20 min...105

min...135 min... timer programmes to achieve the final drying level. Dry the cotton laundry at high temperatures and synthetic and easy- care laundry at low temperatures depending on the type of the laundry.

C You must press the “Low temperature” button for synthetics

14 EN

Image 14
Contents Condenser Time Dryer Explanation of symbols Read this manual prior to initial operation of the productTable of Contents Your Dryer OverviewTechnical Specification Important safety information General safetyChildren’s safety Intended useInstallation First useTransportation of the machine Disposing of the old machineFitting a different plug Built-under installationElectrical Connection Washer/dryer combinationLaundry suitable for drying in the machine Initial preparations for dryingThings to be done for energy saving Laundry unsuitable for drying in the machineLoading Preparing laundry for dryingCorrect load capacity 12 EN13 EN Selecting a Programme and OperatingYour MachineControl panel 14 EN Timer programme selectionPreparing the machine Programme selection and consumption table 15 ENAdding/removing laundry in standby mode Auxiliary function Low temperatureTimer follow-up indicator Ending the programme through cancelingEnd of programme 17 ENFilter Cartridge / Door Inner Surface Maintenance and cleaningWater tank 18 ENFor the condenser 19 ENSuggested solutions for problems 20 ENWhat is not covered? GuaranteeWhat is covered? Important notes22 EN ServiceService once the manufacturers guarantee has expired Republic of Ireland