Beko DC 7100 manual For the condenser, 19 EN

Page 19

For the condenser;

Hot and humid air in the condenser is cooled with the cold air from the room. Thus,

the humid air circulating in your dryer is condensed and then pumped into the tank. CClean the condenser after every 30 drying

cycles or once a month. To clean the condenser:

1.If a drying process has been carried out, open the door of the machine and wait until it cools down.

2.Unlock the 2 condenser locks after opening the kick plate.

3. Pull out the condenser.

4.Clean the condenser by applying pressurized water with a shower armature and wait until the water drains.

5.Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely.

6. Close the kick plate cover.

19 EN

Image 19
Contents Condenser Time Dryer Read this manual prior to initial operation of the product Explanation of symbolsTable of Contents Overview Your DryerTechnical Specification General safety Important safety informationIntended use Children’s safetyFirst use InstallationDisposing of the old machine Transportation of the machineWasher/dryer combination Built-under installationElectrical Connection Fitting a different plugLaundry unsuitable for drying in the machine Initial preparations for dryingThings to be done for energy saving Laundry suitable for drying in the machine12 EN Preparing laundry for dryingCorrect load capacity LoadingControl panel Selecting a Programme and OperatingYour Machine13 EN Preparing the machine Timer programme selection14 EN 15 EN Programme selection and consumption tableEnding the programme through canceling Auxiliary function Low temperatureTimer follow-up indicator Adding/removing laundry in standby mode17 EN End of programme18 EN Maintenance and cleaningWater tank Filter Cartridge / Door Inner Surface19 EN For the condenser20 EN Suggested solutions for problemsImportant notes GuaranteeWhat is covered? What is not covered?Republic of Ireland ServiceService once the manufacturers guarantee has expired 22 EN