Auxiliary function
Low temperature
This function allows for drying at lower temperatures and therefore saves energy. Warning LED will light up when you select the function.
C You must use this function when you dry your synthetic or delicate laundry.
Warning indicators
CWarning indicators may differ according to the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter cleaning after the programme finishes.
CIf the filter cleaning warning light lights up continuously, please refer to, “Suggested solutions for problems”.
Water tank
A Warning LED will light up at the end of the programme or when the tank is full with water. The machine stops operating when this warning LED lights up during a programme running. To restart the machine, please drain the water in the water tank. Press “Start/Pause/Cancel” button to start the programme after you have emptied the water tank. The warning LED goes off and the programme resumes operating.
Starting the programme
1.Press “Start/Pause/Cancel” button to start the programme.
2.Light of the “Start/Pause/Cancel” button will turn on to indicate that the programme has started.
Timer follow-up indicator
One of the LEDs is on as far as programme runs and shows the approximate remaining time.
Changing the programme after the programme has started
You can use this feature to dry your laundry in a different programme after your machine has started to run.
For example;
Press and hold the “Start/Pause/Cancel” button for about 3 seconds to select “90” minutes programme instead of “60” minutes program. Select the “90” minutes programme by rotating the program knob.
Press “Start/Pause/Cancel” button to start the programme.
CThe program which is selected first will go on even if the programme selection button is moved and another programme mode is selected while the machine is operating.
You must cancel the ongoing programme in order to change the drying programme. (See, Ending the programme through canceling)
Adding/removing laundry in standby mode
In order to add or take out laundry after the
1. Press the “Start/Pause/Cancel” button to switch the machine to “Pause” mode. Drying process will stop.
2. Open the door at Pause position and close it again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the programme.
C Any laundry added after the drying process was started may cause the already dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.
Child-proof lock
There is a childproof lock to prevent any programme interruption due to the pressing of keys while the programme is on. The loading door and all keys except the “On/Off” key on the panel are deactivated when the
In order to activate the childproof lock, press on the “Start/Pause/Cancel” and “Low temperature” buttons simultaneously for 3 seconds.
To start a new programme after the programme is over or to interrupt the programme, the childproof lock should be deactivated. To deactivate the childproof lock, press the same buttons for 3 sec.
COne of the LEDs on the programme
C
Ending the programme through canceling
The programme which is selected first will keep on going even if the position of the programme selection button is changed. A new programme can be selected and started after “Programme cancel” is activated in order to change the drying programme.
To can cel any selected programme;
•Press “Start/Pause/Cancel” button for about a duration of 3 seconds. The “Filter cleaning”