JVC KD-SX911R, KD-SX991R manual Setting the TA volume level, Automatic clock adjustment

Page 15

Changing the display mode while listening to an FM station

You can change the initial indication on the display to station name (PS NAME) or station frequency (FREQ) while listening to an FM RDS station.

•See also “Changing the general settings (PSM)” on page 24.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TU DISP” (tuner display).

3Turn the control dial to set to the desired indication (“PS NAME” or “FREQ”).

4Press SEL (select) to finish the setting.

Note:

By pressing DISP, you can change the display while listening to an FM RDS station only.

Each time you press the button, the following information appears on the display:

Station frequency

(FREQ)

Programme type

(PTY)

Station name

(PS NAME)

•Then, the display goes back to the original indication in several seconds.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 24.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TA VOL.”

3 Turn the control dial to set to the desired volume. You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 24.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ.” 3 Turn the control dial counterclockwise to select

“OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same procedure and select “ON” in step 3 by turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than 2 minutes after setting “AUTO ADJ” to “ON.” Otherwise, the clock time will not be adjusted. (This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal.)

ENGLISH

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GET0021-001A E KD-SX991R/KD-SX911RPosition And Reproduction Of Labels How to reset your unitContents Location of the Buttons Control panelDisplay window Only for KD-SX991R This section is only for KD-SX991R Remote controllerRemove the battery holder Preparing the remote controller 2. Place the batteryInstalling the battery Return the battery holderBasic Operations Turning on the powerTo drop the volume in a moment To turn off the powerRadio Basic Operations Listening to the radioF1 F2 F3 AM FM station automatic preset SSM Storing stations in memoryReceive Manual preset Tuning into a preset stationRDS Operations ModeMode To deactivate the TA standby mode, press TP Using Standby Reception PTY Standby Reception TA Standby ReceptionTo store your favorite programme types Press SEL select to finish the settingSearching your favorite programme Selecting your favorite programme for PTY Standby ReceptionYou want Code selected into the preset numberPress and hold the number button for More than 2 seconds to store the PTYSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PTY codes CD Operations Playing a CDTo stop play and eject the CD To play back tracks at random Random Play To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyProhibiting CD ejection Select text display mode while playing a CD TextTo cancel the prohibition and unlock the CD Playing a CD TextSelect the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelUsing the sound control memory Recalling the sound modesSelecting and storing the sound modes Select BAS bass, TRE treble or BBE II*/LOUD loudness Storing your own sound adjustmentsCall up the sound mode you want to adjust Repeat steps 2 and 3 to adjust the other itemsTo reset to the factory settings Repeat the same procedure to store other sound modesTurning on/off the Bbeii function Other Main Functions Setting the clockChanging the general settings PSM Basic Procedure24H/12H Preferred Setting Mode PSM itemsTo select the telephone muting TEL To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To select the scroll mode ScrollYou can detach the contol panel when leaving the car Detaching the control panelAttaching the control panel CD Changer Operations Playing CDsSelect the CD automatic changer CD-CH Canceled To go to a particular disc directlyTo show the CD Text information Select the external component External Component OperationsBefore you start What is DAB system?Select the DAB tuner Select the DAB band DAB1, DAB2, or DAB3To tune into a particular ensemble without searching To restore the FM/AM tunerSelect a service you want to listen to Service name Ensemble name Channel number FrequencyStoring DAB services in memory Select the DAB band DAB1, DAB2 or DAB3 you wantEach time you press Button, the DAB band Changes as follows To use Alternative Reception Tuning into a preset DABService Select the number 1 6 for the preset DAB service you wantHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingLW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation? Begint Druk op Before mounting PressVor dem Einbau Drücken Sie Avant le montage Appuyer surOpmerking Alvorens de verbindingen tot stand te brengen Disconnect the speakers from this unit Koppel de speakers van dit apparaat losAbbidung oben
Top Page Image Contents