JVC KD-SX911R, KD-SX991R manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 37

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:	45 W per channel
Rear:	45 W per channel
Continuous Power Output (RMS):
Front:	17 W per channel into 4 Ω, 40 Hz
	to 20 000 Hz at no more than
	0.8% total harmonic distortion.
Rear:	17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0V/20 kΩ load (full scale) Output Impedance: 1 kΩ

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D):

Installation Size: 182 mm × 52 mm × 160 mm

Panel Size: 188 mm × 58 mm × 8 mm

Mass: 1.7 kg (excluding accessories)

ENGLISH

TUNER SECTION

Frequency Range:
FM:	87.5 MHz to 108.0 MHz
AM:	(MW)	522 kHz to	1 620 kHz	Design and specifications subject to change without
	(LW)	144 kHz to	279 kHz	notice.

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 μV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 μV

37

Image 37

Contents GET0021-001A E KD-SX991R/KD-SX911RPosition And Reproduction Of Labels How to reset your unitContents Control panel Location of the ButtonsDisplay window Only for KD-SX991R This section is only for KD-SX991R Remote controllerInstalling the battery Preparing the remote controller 2. Place the batteryReturn the battery holder Remove the battery holderTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio Basic OperationsF1 F2 F3 AM Storing stations in memory FM station automatic preset SSMReceive Manual preset Tuning into a preset stationMode RDS OperationsMode PTY Standby Reception Using Standby ReceptionTA Standby Reception To deactivate the TA standby mode, press TPSearching your favorite programme Press SEL select to finish the settingSelecting your favorite programme for PTY Standby Reception To store your favorite programme typesPress and hold the number button for Code selected into the preset numberMore than 2 seconds to store the PTY You wantAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station PTY codes Playing a CD CD OperationsTo stop play and eject the CD To go to the next tracks or the previous tracks To fast-forward or reverse the trackTo go to a particular track directly To play back tracks at random Random PlayTo cancel the prohibition and unlock the CD Select text display mode while playing a CD TextPlaying a CD Text Prohibiting CD ejectionAdjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustRecalling the sound modes Using the sound control memorySelecting and storing the sound modes Call up the sound mode you want to adjust Storing your own sound adjustmentsRepeat steps 2 and 3 to adjust the other items Select BAS bass, TRE treble or BBE II*/LOUD loudnessRepeat the same procedure to store other sound modes To reset to the factory settingsTurning on/off the Bbeii function Changing the general settings PSM Setting the clockBasic Procedure Other Main Functions24H/12H Preferred Setting Mode PSM itemsTo select the dimmer mode Dimmer To cancel Advanced SCM SCM LinkTo select the scroll mode Scroll To select the telephone muting TELDetaching the control panel You can detach the contol panel when leaving the carAttaching the control panel Playing CDs CD Changer OperationsSelect the CD automatic changer CD-CH To go to a particular disc directly CanceledTo show the CD Text information Select the external component External Component OperationsSelect the DAB tuner What is DAB system?Select the DAB band DAB1, DAB2, or DAB3 Before you startSelect a service you want to listen to To restore the FM/AM tunerService name Ensemble name Channel number Frequency To tune into a particular ensemble without searchingSelect the DAB band DAB1, DAB2 or DAB3 you want Storing DAB services in memoryEach time you press Button, the DAB band Changes as follows Service Tuning into a preset DABSelect the number 1 6 for the preset DAB service you want To use Alternative ReceptionHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation? Vor dem Einbau Drücken Sie Before mounting PressAvant le montage Appuyer sur Begint Druk opOpmerking Alvorens de verbindingen tot stand te brengen Koppel de speakers van dit apparaat los Disconnect the speakers from this unitAbbidung oben