JVC KD-SX911R, KD-SX991R manual To reset to the factory settings, Turning on/off the Bbeii function

5 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.

Your adjustment made for the selected sound mode is stored in memory.

6 Repeat the same procedure to store other sound modes.

To reset to the factory settings

Repeat the same procedure and reassign the

preset values listed in the table on page 21.

Turning on/off the BBEII function

(only for KD-SX991R)

The BBEII* function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc.

When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBEII function adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that all frequencies reach the listener’s ears at the proper time.

In addition, the BBEII function boosts low and high frequencies, which loudspeakers tend to be less efficient in reproducing, through dynamic, program-driven augmentation. When combined with the phase compensation feature, the resulting sound has a clearer, more finely detailed “live” presence.

As you turn the control dial clockwise in step 3 on the previous page, the BBEII function changes as follows:

BBE 1 BBE 2 BBE 3

BBE OFF

As the number gets higher, the BBEII function becomes stronger.

When shipped from the factory, the BBEII function is set to “BBE 2.”

To cancel the BBEII function, select “BBE OFF.”

*Under license from BBE Sound, Inc.

Ris a trademark of BBE Sound, Inc.

ENGLISH

23