Haier HDY6-1 operation manual Installation, Dimensions, Packing accessories

Page 3

Installation

Dimensions

b

a = 855 mm b = 620 mm c = 595 mm Weight = 38 Kg

c

Packing accessories

Checklist of the accessories and materials provided with the machine:

 

Name

Owner's

Certificate of

Drainpipe

 

 

manual

Conformity

 

 

 

 

 

 

Quantity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To ensure the dryer operating normally, attention must be paid to the following in placement:

The dryer must be horizontally installed. Its bottom is equipped with adjustable base angles. Adjust these 4 angles to level before operation;

Check whether there is any damage to the dryer during transportation. Any damaged dryer must not be electrified. In case of any damage, contact your dryer supplier;

The dryer must be kept away from flammable or detonable substances The surrounding environment must be dry and ventilated; Do not install the dryer on any hairy carpet because the normal

ventilation of the vent hole may be blocked

To allow the dryer to perform better, the ambient temperature shall not be lower than 10 nor higher than 35 



Installation

Column Installation

To save space, the dryer may be installed on a prepositioned drum washing machine using a folding frame. This dryer can be placed with the HBF series washers by a folding frame. For specific installation, refer to the instructions for the installation of the folding frame.

Change the door-opening direction

 

If the direction of opening the dryer's door is

 

not suitable to the location, its opening direction

 

may be changed. The detailed operating

 

procedures are as follows:

 

Screw off the 4 screws(1) fixing the door's

 

hinge to remove the door(5);

 

Remove the hinge(3) from the door and

 

take off the hinge cover(4) at the other side

 

and fix the hinge back;







Screw off the screws fixing the door



switch(6) to remove the door switch. Take



 

off the door switch cover(7) at the other 





 

side and fix the door switch back;

 

Put the removed hinge cove(4)r and

 

door switch cover(7) into the side opposite

 

to the door;

 

Remove the 4 corks and the door lock

cover from the front panel and put them on the other side of the front panel;

Fix the door on the other side of the machine.

Drain switchover

During the drying of the laundry, the condensate water is automatically collected in the box inside the machine, so that the water needs to





Image 3
Contents Name of Parts Table of ContentsImportant Safety Instructions = 855 mm b = 620 mm c = 595 mm Weight = 38 Kg InstallationDimensions Packing accessoriesLoad to dry Turning on powerPreparation Treatment of laundry to dryControl panel Drying Programming GuideDrying Methods DegreeCleaning the surface Cleaning and MaintenanceTrouble shooting Bulb Wiring CircuitSpecifications Heat1