14
THE DELICATE FUNCTION
To dry more lightly the sensitive and temperature sensitive textiles (e.g. acrylic, viscose). For fabrics with the symbol 
on the fabric label. Pro- gramme operates with decreased heat.
THE SENSITIVE FUNCTION
To dry lightly of fabrics that are fre- quently worn. Programme starts on full heat setting, which is then decrease as the programme continue to be lightly to the laundry.
THE ANTICREASE FUNCTION
Extends anticrease phase (30 minutes) at the end of the drying cycle to 90 mi- nutes. This function prevents laundry from creases. Laundry can be removed during the anticrease phase.
THE BUZZER FUNCTION
When the buzzer function is activated you can hear the buzzer at the:
•cycle end
•
•cycle interruption
The buzzer function is by default always on. You can use this function to activate or deactivate the sound.
THE DELAY START FUNCTION
Let to delay the start of a drying programme by 3, 6 or 9 hours.
1.Set the drying programme and functions.
2.Push the Delay start button as many times as necessary.
3.To activate the Delay start function, push the Start/Pause button. The LEDs (9H, 6H, 3H) change on each 3 hours.
STARTING A PROGRAMME
To activate the programme push the Start/Pause button. The LED above the push button changes the colour to red.
CHANGE A PROGRAMME
To change a programme, turn the pro- gramme dial to 
(off) and then set the programme again.
AT THE END OF PROGRAMME
When the drying cycle is complete, LEDs End and Filter are on . If the Buz- zer function is on, an acoustic signal sounds intermittently for about one mi- nute.
The drying cycles (except for the Wool care programme) are au- tomatically followed by an anti- crease phase which continue around 30 minutes. The laundry can be removed during the anti- crease phase (The laundry should be taken out towards the end of the
To remove the laundry:
1.Turn the programme dial to 
(off)
2.Open the appliance door.
3.Remove the laundry.
4.Close the appliance door.
After each drying cycle: clean the filter
(See chapter CARE AND CLEANING.)