Using the electronic Minute Timer

The Minute Timer does not start or stop the oven. It works like a kitchen timer. It can be set in hours and minutes up to 12 hours 59 minutes. The Minute Timer will display minutes and seconds for settings under

1 hour. You will hear four 1-second tones when the set time is up unless reminder tones are disabled.

USING YOUR OVEN

When the time is up:

You will hear four 1-second tones, then four

1-second reminder tones every minute until you press TIMER OFF.

YOU SEE

TIMER

1. PRESS

YOU SEE

TIMER

SET

TIMER

2. Set time.

Press the “up” ( ) or “down” () pad(s) until the correct time shows on the display.

PRESS

YOU SEE

HR

MIN

TIMER

 

(example for 10 minutes)

 

 

3. PRESS

YOU SEE

START

ENTER

TIMER

OR

TIMER (display counts down)

SET

The Minute Timer will begin counting down immediately after the timer is started.

4. PRESS

YOU SEE

TIMER

OFF

(time of day)

To cancel the Minute Timer:

PRESS

YOU SEE

TIMER

OFF

(time of day)

Disabling the timer reminder tones:

To disable the reminder tones, press and hold TIMER SET for 5 seconds.

To enable the tones, follow the same step.

After disabling or enabling reminder tones, a single tone will sound to tell you the signals have been changed. “nAg” and “OFF” or “nAg” and “On” will appear on the display. Press START/ENTER for return to the Minute Timer countdown or the time of day dis- play.

Starting a function

After programming a function, you must press

START

START/ENTER to start the function. If you

ENTER do not press START/ENTER within

 

5 seconds of programming, “START?” will

show on the display as a reminder. The control will return to time of day mode after 5 minutes if START/ENTER is not pressed.

9

Page 9
Image 9
Whirlpool GMC305PD, GMC275PD, RMC275PD Using the electronic Minute Timer, Starting a function, To cancel the Minute Timer