USING YOUR OVEN
Command pads
The command pads tell the oven what to do and in what order. Some command pads have an Indicator Light. The Indicator Light comes on when you press the command pad. The ON Indicator Light comes on when you press START/ENTER for an oven function.
Using the control lock
The control lock prevents unwanted use of the oven by disabling most of the control panel command pads (except CLOCK, TIMER SET, TIMER OFF, and LIGHT).
NOTES:
•Control lock is only available when oven is not in use or control has not been set.
•Set control lock when cleaning the control panel to prevent oven from accidentally turning on.
To lock or deactivate the control panel:Press and hold START/ENTER for 5 seconds. A single
START tone will sound and “Loc” and 
will appear on the temperature display. When
ENTER
the control is locked, only the clock, timer, and oven light will operate.
To unlock the control panel:Press and hold START/ENTER for 5 seconds. A single
OFF | tone will sound and “Loc” and | will | |
disappear from the temperature display. | |||
CANCEL | |||
Setting the clock
1. PRESS | YOU SEE |
CLOCK |
|
TIME
(last time of day remembered)2. Set time.
Press the “up” (▲) or “down” (▼) pad(s) until the correct time shows on the display.
PRESS | YOU SEE |
HR | MIN |
TIME
(example for 5:30)Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for error tones, timer reminder tones and the hidden function signal:
Press and hold STOP TIME for 5 seconds. A short tone will sound to tell you the signals have been changed. Repeat the above step to turn the signals back on.
To choose between high and low volume signals:Press and hold DELAY START TIME for 5 seconds. A short tone will sound to tell you the signals have been changed. “Snd” and “HI” and “Snd” and “LO” will appear on the time display to show the volume you chose. If the volume is changed while the audible signals
are off, then signals are turned back on at the volume setting chosen.
3. PRESS | YOU SEE |
START
ENTER 
Disabling the clock display:
If you do not want the clock time displayed, press and hold CLOCK for 5 seconds. To display the clock time again, press and hold CLOCK for 5 seconds. You should not have to reset the time.
8
