Whirlpool GMC275PD To delay start and stop automatically, Set the start time, Set the cook time

USING YOUR OVEN

To delay start and stop automatically: 6.

1.Place the oven rack(s) where you need them and put your food in the oven.

To place your racks correctly, see “Positioning racks and pans” in “Using the oven” earlier in this section.

PRESS	YOU SEE
DELAY	F
START
TIME	BAKE

STARTTIME

2. PRESS YOU SEE

7. Set the start time.

BAKE

F

BAKE

Press the “up” (▲) or “down” (▼) pad(s) until the correct time shows on the display.

The following example shows a chosen start time of 2 o’clock. The oven will shut off by itself at 2:30 (the set start time plus the set cook time).

3. Set the temperature (optional).

PRESS YOU SEE

PRESS	YOU SEE
HR MIN	F

BAKE

TEMP

F

STARTTIME

BAKE

(example shows Bake at 375°F)

Do this step if you want to set a temperature other than 350°F. Press ▲ to raise the temperature or ▼ to lower the temperature in 5°F amounts. Use these pads until the temperature you want shows on the small display.

4. PRESS	YOU SEE
COOK	F
TIME	BAKE

COOK TIME

5. Set the cook time.

Press the “up” (s) or “down” (t) pad(s) until the correct time shows on the display.

PRESS	YOU SEE
HR MIN	F
	BAKE

COOK TIME

(example shows 30-minute baking/roasting time)

(example shows 2 o’clock start time)

8. PRESS	YOU SEE
START
ENTER	F
	DELAY BAKE

NOTE: You can change the temperature or time settings any time after pressing START/ ENTER by repeating Steps 2 through 7.

9. When the start time is reached:

You will hear a 1-second tone. The display will count down the baking/roasting time in hours and minutes (if the cook time is more than one hour) or in minutes and seconds (if the cook time is less than one hour).

YOU SEE

F

HEAT

BAKE ON

COOK TIME

(display counts down cook time)

16