Setting the controls

NOTE: Make sure the clock is set to the correct time of day. (See “Setting the clock” in the “Using Your Range” section.)

To start cleaning immediately:

1. PRESS

YOU SEE

AUTO

CLEAN

CLEAN

TIME

This will automatically set a 312-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down 12 hour before the cycle is over.

2. Set the cleaning time (optional).

PRESS

YOU SEE

USING YOUR OVEN

4.After the Self-Cleaning cycle ends:

YOU SEE

LOCKED goes off and the door unlocks.

5.After the oven cools to room tempera- ture, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mildly abrasive cleanser or cleaning sponge.

HR MIN

CLEAN

TIME

(example shows 412-hour cleaning time)

If you want a Self-Cleaning cycle longer or shorter than 312 hours, use the HR and MIN pads to set the cleaning time you want. Press the “up” () or “down” () pad(s) until a time between 212-412hours shows on the display.

Use 212 hours for light soil.

Use 312-412hours for average to heavy soil.

To delay the start using delay start time:

1. PRESS

YOU SEE

AUTO

CLEAN

CLEAN

TIME

This will automatically set a 312 hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down 12 hour before the cycle is over.

3. PRESS

YOU SEE

START

ENTER

HEAT

DOOR LOCKED CLEAN

 

TIMED

TIME

Make sure the door is closed all the way. If the door is open even a little, it will not lock. Press the door closed if needed. If the door is closed, it will lock as soon as you press START/ENTER.

2. Set the cleaning time (optional).

PRESS

YOU SEE

HR

MIN

CLEAN

TIME

(example for 412-hour cycle)

If you want a Self-Cleaning cycle longer or shorter than 312 hours, use the HR and MIN pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 212-412hours shows on the display.

Use 212 hours for light soil.

Use 312-412hours for average to heavy soil.

19

Page 19
Image 19
Whirlpool RMC305PD, GMC275PD, GMC305PD Setting the controls, To start cleaning immediately, Set the cleaning time optional