Auto Splp Timer on / OFF, For Example | JVC 0105KTH-MW-BJ manual

EN 55

8AUTO SP]LP TIMER — ON / OFF

When this function is set to “ON,” the unit automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer- recording in SP mode.

For Example:

Recording a programme of 210 minutes in length onto a 180- minute tape

Approximately 150 minutes	Approximately 60 minutes
SP mode	LP mode

Total 210 minutes

Make sure you set this function to “ON,” before the timer- recording starts.

NOTES:

●If you have programmed the unit to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set “AUTO SP]LP TIMER” to “ON.” In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

●In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape.

●There may be some noise and sound disturbance at the point on the tape where the unit switches from SP to LP mode.

●The Auto SP]LP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes longer than E-180, or with some tapes of shorter lengths.

8VIDEO STABILIZER — ON / OFF

When this function is set to “ON,” you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder.

NOTES:

●When you finish viewing a tape, be sure to set this function to “OFF.”

●Regardless of the setting, this function has no effect during recording and during special effects playback.

●The on-screen display may jitter vertically when this function is set to “ON.”

●To watch recordings with close-caption, set this function to “OFF.”

8AUTO POWER OFF — 3H / OFF

When this function is set to “3H,” the unit is turned off automatically if no operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on the screen 3 minutes before the unit is turned off.

Image 55

JVC 0105KTH-MW-BJ, LPT1016-001A manual Auto Splp Timer on / OFF, For Example

Contents

HR-XV38SAG HR-XV38SAS Use only discs marked with the following Safety Precautions Contents Region Number About DiscsPlayable Discs Unplayable Discs Open the disc tray File Structure of DiscsPlacing a Disc Care and Handling of Discs Front View Counter Display Tape Speed SP/LP or EP* pg Satellite Auto Recording Indicator N pgTape Remaining Time Indicator pg ON-SCREEN Display VHS deck E Button rt Button Enter Button How To Use Connect the unit to TV Check the contentsBasic Connections Situate the unit 10 EN Plug the end of the mains power cord into a mains outletBack of TV Turn on the unit Scan Mode SetSwitch the mode DVD deck Video Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsBack of TV Audio in connectors 12 EN Set the video channel Access the Video Channel Set modeExit the Video Channel Set mode Video Channel Set 14 EN Auto Set Up Return to the normal screen Select the modeSelect the mode setting Monitor Set DVD deck Language 16 EN Select the DVD deck Select the mode 18 EN Language Code List Start the clock operation Clock SetTo make corrections anytime during the process Basic Playback 20 EN Playback Features Manual Tracking 22 ENInstant ReView Repeat Playback Basic Recording Tape Remaining Time Recording FeaturesInstant Timer Recording ITR 24 EN Playback Receiving Stereo and Bilingual ProgrammesRecording 26 EN System SetupGuide Program Number Set Enter the G-CODEnumber Timer ProgrammingAccess the G-CODE/SHOWVIEWscreen Access the G-CODEProgram screen Guide Program Number Set Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials 28 EN Express Timer Programming Return to the timer mode Disengage the timer modeAccess the Programme Check screen Cancel or change a programme Select the programme to modify When programmes overlap each otherCancel or change programme setting Confirm the overlapping programmes Press p Recording modeInput Connector Input L-1 connector 32 EN Press Load the discPause playback Start playback 34 EN Locating a Desired Scene Using the DVD MenuAccess the DVD menu Access the PBC menu Zooming Locating the Start Point of the Item or Skip the Item 36 EN If you have specified a wrong selection Access the menuSelect the time Select the subtitle language Select the view angle Select the audio setting38 EN Angle Selection Sound Effect 3D Phonic VFP function Adjusting the picture quality 40 EN How to Access the On-Screen BarAccess the status bar Access the menu bar During Video CD/SVCD playback, selects the audio channels Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the audio language or sound track During playback, selects the subtitle language Control display Precautions42 EN Outline Press rt to select the desired group, then press e Basic PlaybackSelect the group Control display appears on the TV screen. pg Group/File Selection 44 ENZooming a still picture Make connections Set the unit’s input modeSet the edit mode Engage the Record Pause mode Start the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck 46 EN From DVD to VHS Dubbing For the digital audio device 48 ENPlace a disc and load an MD Prepare the audio device for dubbing Display the code Change the remote control codeSet the remote control code Turn off the unit Operating a JVC TV 50 ENOperate the TV Satellite receiver Connecting To a Satellite Receiver Make connections 52 EN Function SET, then press Access the Mode Set screenFunction Set VHS deck Press rt to move the highlight bar pointer to 54 EN Subsidiary Settings For Example Auto Splp Timer on / OFF Access the DVD Set Up menu screen Mode Set DVD deck56 EN Audio Settings Picture SettingsSet this item correctly according to the logo on the device Playback discs Others Settings58 EN Parental Lock Country/Area Code List for Parental Lock Auto Channel Set Access the Auto Channel Set screen60 EN Tuner Set Manual Channel Set Delete a Channel 62 ENSwap Channel Position FRQ number for the channel starts blinking Perform tuningSelect the channel to fine-tune Select the channel Set the Child Lock Slide to the right You can disable the unit’s operation64 EN Child Lock Recorded tape Information on Multi-System CompatibilityVHS deck Off-Air Recording TV System Recording circuit 66 ENTape-To-Tape Editing Recorded tape Playback equipment Playback DVD deck PowerTape Transport VHS deck Playback VHS deck Recording VHS deck Input mode is not correct Set the input mode to L-1 or F-168 EN MP3/JPEG Files Playback DVD deck Timer recording won’t work Timer Recording VHS deck VIDEO/AUDIO DVD deck TUNER/TIMER VHS deck70 EN VIDEO/AUDIO VHS deck CODE/SHOWVIEW System Setup Auto Channel Set Auto Set UpConnecting To a Dolby Digital Decoder or An Amplifier Express Timer Programming HR-XV38SAG/HR-XV38SAS