JVC LPT1016-001A, 0105KTH-MW-BJ manual 26 EN, System Setup, Guide Program Number Set

[0-9] OR [ / ]

GUIDE PROG 2

26 EN OPERATIONS ON VHS DECK (cont.)

G-CODE®/SHOWVIEWTM

System Setup

The G-CODEtimer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function.Simply key in the G-CODEnumber for the TV programme you wish to record (found in most TV listings) and the unit's timer is automatically programmed.

You have to set Guide Program numbers, which are assigned to each station for purposes of ShowView timer programming, for all the stations stored in your unit's memory to get proper results. Before G-CODEsetup you must have performed Auto Set Up. (
pg. 14)

IMPORTANT

After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Program Number settings.

INFORMATION

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature, but only the term G-CODEsystem will be used in the instructions. If you use the SHOWVIEW system, follow the same instructions listed for the G-CODEsystem.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

Guide Program Number Set

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

B Access the Main Menu screen.

Press SET UP.

C Access the Initial Set screen.

Press rt to move the highlight bar (pointer) to “INITIAL SETUP,” then press ENTER or e.

D Access the Guide Program Set screen.

Press rt to move the highlight bar (pointer) to “G-CODE/ SHOWVIEW SETUP,” then press ENTER or e.

E Enter the Guide Program number.

Press rt or number keys to	G-CODE/SHOWVIEW SETUP
enter the Guide Program
number for the desired	GUIDE PROG		TV PROG
station as shown in the TV
	2	5
listings. Then press ENTER or
e.
	[0-9] OR [ /	]

F Enter the Receiving channel position number.

Then press rt or number keys to input the number of the unit’s channel position on which the Guide Program number’s broadcast is received by the unit. Then press ENTER or e.

●If the satellite broadcast is received on your unit's auxiliary channel “L-1,” select “L-1” for the channel position.

●Repeat steps E and F as necessary.

G-CODE/SHOWVIEW SETUP

TV PROG

5

G Return to the normal screen.

Press SET UP.

Guide Program Number

“Guide Program (GUIDE PROG) number” refers to the assigned TV station numbers,according to broadcast area, for G-CODEtimer recording. The Guide Program numbers can be found in most TV listings.