70 EN, VIDEO/AUDIO VHS deck | JVC LPT1016-001A, 0105KTH-MW-BJ

70 EN

SPECIFICATIONS

GENERAL

Power requirement : AC 110 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on	: 23 W
Power off	: 4.5 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)
	: 435 mm x 93 mm x 272 mm
Weight	: 4.2 kg
Format	: VHS PAL/NTSC standard
Maximum recording time
(SP)	: 240 min. with E-240 video cassette
	(PAL/MESECAM)
	: 160 min. with T-160 video cassette
	(NTSC)
(LP)	: 480 min. with E-240 video cassette
	(PAL/MESECAM)
(EP)	: 480 min. with T-160 video cassette
	(NTSC)

VIDEO/AUDIO (VHS deck)

Signal system	: PAL-type colour signal and CCIR
	monochrome signal, 625 lines
	50 fields
	NTSC colour and EIA monochrome
	signal, 525 lines/60 fields.
Recording system	: DA4 (Double Azimuth) head helical

scan system

Signal-to-noise ratio: 45 dB Horizontal resolution

:250 lines (PAL/MESECAM)

:220 lines (NTSC)

Frequency range	: 70	Hz to 10,000	Hz (Normal audio)
	20	Hz to 20,000	Hz (Hi-Fi audio)
Input/Output	: RCA connectors:
	IN x 2, OUT x 1

VIDEO/AUDIO (DVD deck)

Signal system	: NTSC 3.58
Applicable disc	: DVD (12 cm, 8 cm)
	CD (12 cm, 8 cm)
Audio characteristics
DVD	: 4 Hz – 22 KHz
Frequency responce
CD	: 4 Hz – 20 KHz
S/N Ratio	: 90 dB
Wow and flutter	: Below Measurable Level
Dynamic range	: 90 dB
Output	: (RCA) 1.0 Vp-p/75 ohm
Component-Y	: (RCA) 1.0 Vp-p/75 ohm
Component- PB /PR : (RCA) 0.7 Vp-p/75 ohm
Audio	: (RCA) 2 Vrms, 1 Kohm
Digital Audio	: –21 dBm to –15 dBm (peak)

TUNER/TIMER (VHS deck)

TV channel storage capacity

	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage
VHF	: (low) 42 MHz – 175 MHz
	(high) 175 MHz – 470 MHz
UHF	: 470 MHz – 870 MHz
Aerial output	: UHF channels (Adjustable E28-E60)
Program capacity	: 1-year programmable timer / 8

programs

Memory backup time

: Approx. 10 min.

ACCESSORIES

Provided accessories

:RF cable,

Infrared remote control unit, “R6” battery x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

Image 70

JVC LPT1016-001A, 0105KTH-MW-BJ manual 70 EN, VIDEO/AUDIO VHS deck, VIDEO/AUDIO DVD deck, TUNER/TIMER VHS deck

Contents

HR-XV38SAG HR-XV38SAS Safety Precautions Use only discs marked with the following Contents Unplayable Discs About DiscsPlayable Discs Region Number Care and Handling of Discs File Structure of DiscsPlacing a Disc Open the disc tray Front View ON-SCREEN Display VHS deck Satellite Auto Recording Indicator N pgTape Remaining Time Indicator pg Counter Display Tape Speed SP/LP or EP* pg How To Use E Button rt Button Enter Button Situate the unit Check the contentsBasic Connections Connect the unit to TV 10 EN Plug the end of the mains power cord into a mains outletBack of TV DVD deck Scan Mode SetSwitch the mode Turn on the unit 12 EN 8To connect to a TV with S-VIDEO/AUDIO in connectorsBack of TV Audio in connectors Video Connection Video Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the video channel Auto Set Up 14 EN Monitor Set DVD deck Select the modeSelect the mode setting Return to the normal screen 16 EN Language Select the mode Select the DVD deck Language Code List 18 EN Start the clock operation Clock SetTo make corrections anytime during the process 20 EN Basic Playback Playback Features Repeat Playback 22 ENInstant ReView Manual Tracking Basic Recording 24 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining Time Playback Receiving Stereo and Bilingual ProgrammesRecording 26 EN System SetupGuide Program Number Set Access the G-CODEProgram screen Timer ProgrammingAccess the G-CODE/SHOWVIEWscreen Enter the G-CODEnumber 28 EN Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials Guide Program Number Set Express Timer Programming Cancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer mode Confirm the overlapping programmes When programmes overlap each otherCancel or change programme setting Select the programme to modify 32 EN Recording modeInput Connector Input L-1 connector Press p Start playback Load the discPause playback Press Access the PBC menu Locating a Desired Scene Using the DVD MenuAccess the DVD menu 34 EN Locating the Start Point of the Item or Skip the Item Zooming 36 EN Select the subtitle language Access the menuSelect the time If you have specified a wrong selection Angle Selection Select the audio setting38 EN Select the view angle VFP function Adjusting the picture quality Sound Effect 3D Phonic Access the menu bar How to Access the On-Screen BarAccess the status bar 40 EN During playback, selects the subtitle language Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the audio language or sound track During Video CD/SVCD playback, selects the audio channels Outline Precautions42 EN Control display Control display appears on the TV screen. pg Basic PlaybackSelect the group Press rt to select the desired group, then press e Group/File Selection 44 ENZooming a still picture Engage the Record Pause mode Set the unit’s input modeSet the edit mode Make connections 46 EN Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the source player Dubbing From DVD to VHS Prepare the audio device for dubbing 48 ENPlace a disc and load an MD For the digital audio device Turn off the unit Change the remote control codeSet the remote control code Display the code Operating a JVC TV 50 ENOperate the TV Connecting To a Satellite Receiver Satellite receiver 52 EN Make connections Press rt to move the highlight bar pointer to Access the Mode Set screenFunction Set VHS deck Function SET, then press Subsidiary Settings 54 EN Auto Splp Timer on / OFF For Example Access the DVD Set Up menu screen Mode Set DVD deck56 EN Audio Settings Picture SettingsSet this item correctly according to the logo on the device Parental Lock Others Settings58 EN Playback discs Country/Area Code List for Parental Lock Tuner Set Access the Auto Channel Set screen60 EN Auto Channel Set Manual Channel Set Delete a Channel 62 ENSwap Channel Position Select the channel Perform tuningSelect the channel to fine-tune FRQ number for the channel starts blinking Child Lock Slide to the right You can disable the unit’s operation64 EN Set the Child Lock TV System Information on Multi-System CompatibilityVHS deck Off-Air Recording Recorded tape Recorded tape Playback equipment 66 ENTape-To-Tape Editing Recording circuit Playback VHS deck PowerTape Transport VHS deck Playback DVD deck MP3/JPEG Files Playback DVD deck Input mode is not correct Set the input mode to L-1 or F-168 EN Recording VHS deck Timer Recording VHS deck Timer recording won’t work VIDEO/AUDIO VHS deck TUNER/TIMER VHS deck70 EN VIDEO/AUDIO DVD deck Express Timer Programming Auto Channel Set Auto Set UpConnecting To a Dolby Digital Decoder or An Amplifier CODE/SHOWVIEW System Setup HR-XV38SAG/HR-XV38SAS