EN 47
Dubbing
(from DVD to VHS)
You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.
However, it is not possible to dub
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote control to the right.
Slide to the right.
A Load a cassette and place a disc.
For the VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
For details, refer to “Placing a Disc” ( pg. 5).
B Prepare the VHS deck for dubbing.
APress VCR.
BPress p to select recording speed.
CSearch for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.
C Prepare the DVD deck for dubbing.
APress DVD.
BStart playback and search for the point where you want to start dubbing by pressing 4, 5 or 3.
D Start dubbing.
A little before the dubbing start point, press and hold 7, then press 4 on the remote control.
●“dub” lights on the front display panel.
E End dubbing.
Press 8.
●Be sure to press 8 while the VCR indicator lights up on the unit.
●If you press 8 or x with the DVD deck selected, the dubbing stopped, but the opening screen is also recorded.
●When you have finished dubbing, press DVD to select the DVD deck and press 8 to stop playback.
NOTES:
●Set “ON SCREEN GUIDE” to “OFF” ( pg. 58) if you do not want to record the
●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing is not recorded.
●Set “PICTURE CONTROL” to “EDIT”. ( pg. 54)
●When you select a setting as “MONITOR TYPE” other than “MULTI” options ( pg. 15), it may not be possible to dub a DVD disc in a cassette correctly.
