52 EN, Make connections | JVC LPT1016-001A, 0105KTH-MW-BJ specification

52 EN

SYSTEM CONNECTIONS (cont.)

Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck)

These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built-in DTS.

Make connections.

Connect the optical cable between the unit and the Dolby Digital Decoder or amplifier with a built-in DTS.

Dolby Digital Decoder or amplifier with built-in DTS

To DIGITAL AUDIO input

Optical cable (not provided)

DIGITAL AUDIO OUT

Note for connection:

Remove the connector cover from the unit and remove the protection cap from the cable.

NOTES:

●For Dolby Digital sound, set “DIGITAL AUDIO OUTPUT” to “DOLBY DIGITAL/PCM”. ( pg. 57)

●For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/ PCM”. ( pg. 57)

CAUTIONS:

●This unit has a dynamic range of more than 80 dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier. A sudden surge in the input level to the speakers may damage them.

●Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the video playback picture.

Image 52

JVC LPT1016-001A, 0105KTH-MW-BJ manual 52 EN, Make connections

Contents

HR-XV38SAG HR-XV38SAS Safety Precautions Use only discs marked with the following Contents About Discs Playable DiscsUnplayable Discs Region Number File Structure of Discs Placing a DiscCare and Handling of Discs Open the disc tray Front View Satellite Auto Recording Indicator N pg Tape Remaining Time Indicator pgON-SCREEN Display VHS deck Counter Display Tape Speed SP/LP or EP* pg How To Use E Button rt Button Enter Button Check the contents Basic ConnectionsSituate the unit Connect the unit to TV 10 EN Plug the end of the mains power cord into a mains outletBack of TV Scan Mode Set Switch the modeDVD deck Turn on the unit 8To connect to a TV with S-VIDEO/AUDIO in connectors Back of TV Audio in connectors12 EN Video Connection Access the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set Set the video channel Auto Set Up 14 EN Select the mode Select the mode settingMonitor Set DVD deck Return to the normal screen 16 EN Language Select the mode Select the DVD deck Language Code List 18 EN Start the clock operation Clock SetTo make corrections anytime during the process 20 EN Basic Playback Playback Features 22 EN Instant ReViewRepeat Playback Manual Tracking Basic Recording Recording Features Instant Timer Recording ITR24 EN Tape Remaining Time Playback Receiving Stereo and Bilingual ProgrammesRecording 26 EN System SetupGuide Program Number Set Timer Programming Access the G-CODE/SHOWVIEWscreenAccess the G-CODEProgram screen Enter the G-CODEnumber Engage the unit’s timer mode To Timer-Record Weekly Or Daily Serials28 EN Guide Program Number Set Express Timer Programming Disengage the timer mode Access the Programme Check screenCancel or change a programme Return to the timer mode When programmes overlap each other Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify Recording mode Input Connector Input L-1 connector32 EN Press p Load the disc Pause playbackStart playback Press Locating a Desired Scene Using the DVD Menu Access the DVD menuAccess the PBC menu 34 EN Locating the Start Point of the Item or Skip the Item Zooming 36 EN Access the menu Select the timeSelect the subtitle language If you have specified a wrong selection Select the audio setting 38 ENAngle Selection Select the view angle VFP function Adjusting the picture quality Sound Effect 3D Phonic How to Access the On-Screen Bar Access the status barAccess the menu bar 40 EN Menu Bar Functions for SVCD/Video CD/Audio CD During playback, selects the audio language or sound trackDuring playback, selects the subtitle language During Video CD/SVCD playback, selects the audio channels Precautions 42 ENOutline Control display Basic Playback Select the groupControl display appears on the TV screen. pg Press rt to select the desired group, then press e Group/File Selection 44 ENZooming a still picture Set the unit’s input mode Set the edit modeEngage the Record Pause mode Make connections Set the input mode of recording deck Engage the Record Pause mode of the recording deck46 EN Start the source player Dubbing From DVD to VHS 48 EN Place a disc and load an MDPrepare the audio device for dubbing For the digital audio device Change the remote control code Set the remote control codeTurn off the unit Display the code Operating a JVC TV 50 ENOperate the TV Connecting To a Satellite Receiver Satellite receiver 52 EN Make connections Access the Mode Set screen Function Set VHS deckPress rt to move the highlight bar pointer to Function SET, then press Subsidiary Settings 54 EN Auto Splp Timer on / OFF For Example Access the DVD Set Up menu screen Mode Set DVD deck56 EN Audio Settings Picture SettingsSet this item correctly according to the logo on the device Others Settings 58 ENParental Lock Playback discs Country/Area Code List for Parental Lock Access the Auto Channel Set screen 60 ENTuner Set Auto Channel Set Manual Channel Set Delete a Channel 62 ENSwap Channel Position Perform tuning Select the channel to fine-tuneSelect the channel FRQ number for the channel starts blinking Slide to the right You can disable the unit’s operation 64 ENChild Lock Set the Child Lock Information on Multi-System Compatibility VHS deck Off-Air RecordingTV System Recorded tape 66 EN Tape-To-Tape EditingRecorded tape Playback equipment Recording circuit Power Tape Transport VHS deckPlayback VHS deck Playback DVD deck Input mode is not correct Set the input mode to L-1 or F-1 68 ENMP3/JPEG Files Playback DVD deck Recording VHS deck Timer Recording VHS deck Timer recording won’t work TUNER/TIMER VHS deck 70 ENVIDEO/AUDIO VHS deck VIDEO/AUDIO DVD deck Auto Channel Set Auto Set Up Connecting To a Dolby Digital Decoder or An AmplifierExpress Timer Programming CODE/SHOWVIEW System Setup HR-XV38SAG/HR-XV38SAS