20 EN | OPERATIONS ON VHS DECK |
Basic Playback
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote control to the right.
Slide to the right.
Clean the video heads using a dry cleaning cassette —
●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON”). ( pg. 54)
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
A Load a cassette.
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.
●Do not apply too much pressure when inserting.
●If the record safety tab has been removed, playback begins automatically. Although the DVD deck is selected, the VHS deck is selected automatically if the DVD deck is in stop mode.
●Select the appropriate colour system with “PAL/MESECAM“ and “NTSC“ in Function Set. ( pg. 54)
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
B Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Find the programme start point.
If the tape is advanced past the start point, press 3. To go forward, press 5.
D Start playback.
Press 4. “bESt” appears blinking on the front display panel during automatic tracking. ( pg. 25)
E Stop playback.
Press 8. Then press x on the VHS deck to remove the cassette.
Usable cassettes
● Compact VHS camcorder recordings can be played on this unit.
Simply place the recorded cassette
into a VHS Cassette
Adapter and it can be used just like any
●This video recorder is equipped with SQPB
*SQPB does not deliver Super VHS resolution.
●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record regular VHS signals only.
*
