To Start a Cycle
1.Press the 
or 
keypad to change cycles.
2.Press the 
keypad to move the cycle in the right most menu box to the center, highlighted position.
3.Press the 
keypad to move the cycle in the left most menu box to the center, highlighted position.
4.Moving the 
and 
keypads allows the selected cycle to scroll through the center, highlighted position.
5.Press 
to start selected cycle.
NOTE: Press and hold 
or 
keypad to make highlighted area move rapidly.
NOTE: If door is not closed when the 
keypad is pressed, display will jump to the Close Door Menu.
Every night at midnight the control will enter Service Menu if the machine is in idle mode on the Cycle Menu.
When a keypad is pressed or the door is opened or an IR communication takes place, the control will turn the LCD contrast on and the backlight back on (if programmed).
Control will also enter specific service
Quarterly Menu displays on the first day of the month for January, April, July and October.
Monthly Menu displays on all other first days of the month.
Daily Menu displays on all other days.
Machine Cycle Definition and Operation
Press any keypad to clear the menu and return to the Cycle Menu.
Optional settings are performed by either pressing a keypad or by a combination of keypad presses:
•Press the 
keypad to jump control to the Contrast Adjust/Backlight Menu.
•Press the 
keypad to enter the Service Menu.
•Press and hold 
, then 
, then 
to enter the System Menu.
A Banner is displayed above the Cycle Selections in the Cycle Menu. If Banner 1 and Banner 2 are programmed, Banner 1 displays for ten (10) seconds and Banner 2 displays for ten (10) seconds. If only one Banner is programmed it will be the only one shown. Refer to Banner Menu Section.
During communication with the PDA or network, all menus enter IR Communications Menu.
70444801 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 11 |