Program Menu
Program Menu
Modify Cycle |
| Global Setup |
|
|
|
Program Menu
PHM1022R
Figure 23
In System Menu, select Program and press 
. To program cycles, select Modify Cycle and
press 
.
To change properties that will affect the machine globally, select Global Setup (i.e., language displayed,
Cool Down Temperature) and press 
.
Press the 
keypad to return to System Menu.
Modify Cycle
|
|
|
|
|
|
|
|
| Cycle01: | Towels |
|
|
|
| |
| Time Dry |
|
|
|
| ||
| Reversing: Global |
|
|
|
| ||
|
|
|
|
|
| ||
| Cycle Reversing | Yes |
|
| |||
|
|
|
|
| s |
| |
| Rotate Time | 120 |
| ||||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
| |||
| Stop Time | 6 | s |
| |||
|
|
|
|
|
|
|
|
| Modify Cycle |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| TMB1313R | ||
|
|
|
|
|
|
|
|
|
|
| Figure 24 |
|
|
|
|
The Modify Cycle Menu is used to program the cycles.
The Cycle Number will be highlighted when the Modify Cycle is first displayed.
Press the 
or 
keypad to change cycle selections.
The cycle can be turned on and off by pressing
the 
keypad. If the cycle is turned off, the Cycle Name will display “Off” and the user will not be able to make any changes to the cycle.
Press the 
keypad to make the highlighted box move to the cycle name to the right of the cycle number.
Press the 
keypad from Cycle Number to make the display jump to the Modify Cycle Cool Down Menu.
NOTE: All cycle numbers have to be scrolled through even though they may be shut off. Figure 25 illustrates the flow of the cursor during the programming of a cycle.
To edit a cycle name, select the cycle name and press
the 
keypad.
The first character of the Cycle Name will have a blinking underscore underneath to display it is ready
for editing. Use the 
and 
keypads to select the different characters. After the desired character has
been selected, press the 
keypad to save the character and move to the next character. The user
may press the 
keypad to go back a character.
Pressing the 
keypad when located on the first character will take the user to the last character, which
may be a blank space. Continue pressing the 
keypad to move to desired character. The blinking
underscore is under the last character and the 
keypad is pressed, the blinking underscore will move to the first character.
Press the 
keypad to exit edit mode.
22 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 70444801 |